Search results

Thanks for the threads, Ernie

Thanks for the info, it seems to be safe I should remove the drive shaft.To refine my question, in netural when being towed, will the slider gears on the main shaft sling enough oil to lube the bearing between the input and output shafts? Has anybody towed a vehicle that had a T-5 trans with or...

I have a T roadster with a Chevy S-10 T-5 trans, can it be towed in neutral at highway speed for a prolonged distance, with out harm? Will the T-5 lubricate properly in neutral,when being towed at highway speed?:confused: I am towing with a 32.

I GOT MINE CUSTOM MADE FROM MAR K ,THEY ARE IN OKLAHOMA CITY, GOOD LUCK ED.:rolleyes:

Is there an easy way to adapt early f 100 disk brakes to a early f 100? Such as,using the spindles and related diks parts on the early f 100, or is there a better way? I was able to adapt 1978 f 350 spindles and disk brakes to my 32bb,by boreing the 32 king pin boss to fit 78 king pin.

What year did ford offer 15" wheels on f 100s and how wide were they? What was the last year the f 100 used the small hub caps, held on with 4 nubs, like the 40 to 48 car and half ton truck? Did the later wheels that used the small caps get wider? I have a 15" by 5" wide and a 15" by 5 1/2"wide...

THANKS FOR INFO,Roadster62, CU ED

Is the headlight bar on the 28 /29 model a, forged or cast? Can it be bent with out breaking?

WHERE IS THE BEST DEAL OR WAY TO GO FOR A 26/27 OPEN CAR RAG TOP? THE WINDSHELD IS CHOPPED 4 INCHES AND THE CAB EXTENDED 10 INCHES WHICH MAY REQUIRE A MAJOR CHANGE IN TOP FRAME WORK. THE FRONT OF A TOURING WELDED TO BACK OF A ROADSTER PICK UP. :cool:

:rolleyes: Flathead, fathead, big block, small block, 2, 4, 6, or more, hell there all neat and if it can run down the road it is neater and if it is yours it is the neatest.

As said,big and small truck cabs are the same so are the front fenders.34 and 33 cabs are almost the same,only belt line on the rear of the cab and the wood in the cab back of the seat differ.32 big and small trucks cabs are the same. 32 and 33 cabs look the same,but the fire wall,dash and cab...

YOU MEAN A 32 WITH A 50S+ FLAT HEAD SHOULD NOT BE ON THE FORD BARN,IT IS NOT STOCK. IT IS A GOOD THING I GOT HELP STOPPING MY 27T WITH 40 FORD BRAKES, BE FOR THIS RULE CAME DOWN.SORRY YOU FEEL THAT WAY,MAYBE YOU CAN TRY THERAPY OR REHAB,SO WE CAN BE A HAPPY FANILY AGAIN?:confused:

I will be 74 in June, it looks like I am average age for the V-8 Times. Will there be a tally of our average age or a tally of the average age of our oldest ride? PS I still like cleavage at my age?

THANKS GUYS FOR THE INFO,NO ZEROS. CU ED:rolleyes:

If you have an early 28A or AA frame,will there be zeros between the A and the production numbers stamped on the frame? I had a 28 roadster and an AA truck in my first life,55 years ago,but can't remember,if there were zeros or if there were 7 digets after the A in the ID number. What have you...

Dennis; The 131"wb would be more driveable. If you are going to streets rod one and zee the frame the long frame would be the keeper,if the frames were in the same condition.You know a 32bb frame is not the same 33 and 34bb feames.I have 32 and 33 bb and found out the hard way they are not the...

i am a little late with a reply but;i cut the required louvers,to be removed about one and a half inch above the opening i wanted, 11 louvers in may case,if this cut is straight and in the right place it makes the job a lot easier. I cut the lower section of the hood 1 inch below the bottom of...

32 has a fat head and 33 is playing in socal snow

Socal snow

Grumpy; speedway motors sells a bearing and seal kit that list f100 brakes for pre 49 fords. But does not list a kit for f 1 brakes good luck.