Search results

Mike if you don't have time and a little extra money, Snyder's is selling an A intake bored out. It was around $100.00 and is brand new. We've drilled out a number of them following the info from Dave Renner.

Thanks so much and done so quickly and we didn't loose any sleep, just went on and it's working. Thanks for all your work for a great bunch of us who really appreciate someone so dedicated to our Hobbies

I use a "dental Pick" that you can find at swap meets. I have dozens of them they are so useful in the shop. You can use a mirror if you can't bend over to see the little plate washer. I'd send a picture but I'm convalescing from knee replacement and not able to get very close to the steering...

You have to remover the little plate that's in the sector right in the beginning. I think that was what was suppose to stop the leaks but didn't work. I'm surprised the tube doesn't have instructions to remove the thin washer. I've removed one every time I've put the tube in a sector

The reason the upper bushings lasted as long as they did is because they were Clevite bushings and had little pockets of "graphite" throughout the bushings. I don't think any of the bushings being sold today have any graphite in them. I grabbed a batch of distributor bushings when I left...

This is the best article and I have used it for a number of years. Tom Endy is one of the best sources for anything Model A period! He has done an immense help to the Model A world with all the technical information he has written about. The fact is I would never drill out the brass plugs on a...

I went through the lower back seat to the floor and put a solid bar on the bottom side for support. If they are fastened to the seat they will pull out the seat in a accident. The S/W is hard to put seat belts in but I feel comfortable with what I did. You need to stay in the car in an...

Bob Have you drilled the hole for cowl lights on a 30/31 Model A? I've got the tool from both Brattons and Snyders and it's nothing like the old pictures were. I'd like to put Cowl lights on my 31 pickup but am nervous about drilling the hole. I could take the light off our 31 S/W Town sedan...

Snyder's already has it. A-9425-X $110.00

There back seat brackets

I've got 42 distributors honed and fitted with the new shafts and when I build them I use only roll pins which are really great.

I've reworked every door on my 31 S/W Town Sedan and I think if you take it apart you will find wear in the locking mechanism. I just had a spring break on the right back door and ordered the new springs from Bert's (I think there for a 32) but they work.

There was a great article a few years back either MARC or MAFCA on repairing the steering column and there's a exhaust part that you can slip in and drill holes to spot weld and make it like new. I think if you as Ron at MARC he might be able to search it or go to the MARC website and search...

That's the best one and use a air tool as it rachets and I got all the studs out even a couple of stubborn studs. Great tool

If I remember correctly, it's just a u shaped piece that goes down over the spring and then the tabs are bent over under neath it? I think you can buy those u shaped pieces?

Berts just sent me four springs and they match the spring in my 31 that just broke. Years ago I rebuilt the four door latches and had an extra set of strikers made up. I just had one of the springs that pushes the striker out broke and Berts had them.

John I've also run one on both my Model A's for 45 years and not had a problem. In all those years I haven't seen a four blade fan break either.

WestTech has a real high end Amp gauge it's not cheap but really nice.

Neil In Charlotte we take it to the recycling place and they take oil and gas and no cost involved for it.

Check before you order the valve for the early 31's (under the tank) was changed and the vendor made the hole bigger and you now have to buy a different pencil filter. Check on Snyder's web page I just went through this last week. Had a new shut off and went to put the pencil filter in and it...