Search results

I thought that all driver Model A's had a battery disconnect on the ground side....

HI All, I am having and have had an issue with my 30 Tudor turn signals. The Tudor is equipped with a wiring harness that is pre-wired for turn signals. the issue that I have is that the Signal-Stat 9000 control switch indicators work once or twice before the flasher stops sending a signal...

Hi All, I am looking for the mate to this license plate. If you have it please let me know even if you absolutely will not part with it. But if you might....... lets talk.

I noticed on my Murray while working on the sub frames that the rivets holding the rear crossmember to the top side of the frame were keeping the subframe from setting on the frame webbing. I drilled a couple of relief holes at the rivet locations to allow the subframe to set correctly. There...

Hi All, Does anyone know where to get NEW driven plates, (steels), for the AR multi plate clutch? I was told that there is an automatic transmission clutch that has some parts that are an exact replacement for the original AR clutch.

First off brake drums are measured by inside diameter, all of them..... the Model A brakes are an 11" diameter brake so the maximum usable diameter would be 11.060". It is not uncommon to see vintage cars use oversize drums (EG; 11.090") Secondly I do not believe that any Model A had these drum...

Buy one of the Les Andrews books and study it while you fidget with your car. If you have much mechanical inclination you will soon start to understand. if you are truly new then let me explain that Les Andrews has been a Model A guru since the 70's or earlier and his books are excellent.

The nuts were square and the screws were raven finish. only a lock washer between the frame and the nut. Many people put the brackets on backwards, the original brackets were installed so that the latches would lye against the fender. this way when they are unlatched they do not interfere with...

This is the replacement rubber radius ball cover style and the brackets it is attached to is the adapter used when a model A has a Ford V8 transmission installed. Do NOT lube the ball as the petroleum product will cause the rubber to deteriorate. Also if this setup gets very loose you will...

Try Bay leaves under the seats.

So all this talk about full flow and part flow is great but exactly how do you change the original model A design so that it does not continue to flow oil up into the lifter chamber? I can only assume that the October 14 Speed mag tells how to do this. Can someone re write this for those who do...

Yes the S/W fordor was the only Model A fordor that had a steel infrastructure. All previous fordor's were carriage construction. The only wood in the S/W as with most common body styles was to attach the upholstery to and of course the body to frame blocks.