Search results

Have a closed drive 39 style trans that I fully rebuilt all new bearings new synchros new detents etc. been driving it a year now and lately it’s giving me some issue. Sometimes when I go to shift into second from first it’s like I hit a wall and can’t get into second. If I release the clutch...

I just installed a new wood header in my 30 tudor. I put the metal header cap on and am getting ready to install the windshield frame. I noticed though the the holes in the header cap don't fully cover the wood header or that the wood header isn't long enough. is this a common issue? Do you...

I’m looking for the drivers side curved roof panel for a 30/31 model A Tudor. Also looking for complete door hinges. Thanks, Chris.

I’m looking for 40 ford style brake drums and hubs.

I’m looking at a set of edelbrock 1116 high lift 8BA heads and was wondering is it necessary to buy the $700 head stud kit they recommend or can I use stock head bolts or even grade 8 bolts?

I’m looking for a 1930 Tudor passenger side subrail, thanks.

Im looking for passenger side door hinges for my 30/31 tudor. I really need the cowl side of the hinge but will take complete sets. Thanks Chris

Hey everyone I could use some wisdom here. I have an 8BA with an isky 400jr cam, thickstun pm7 intake and two fully rebuilt stromberg 97’s and the new stromberg e fire 8BA distributor set to 10° timing. Plugs are b-6 jets are 43’s with 67 power valves at 3000ft elevation. Not running progressive...

I’m looking for a good pair of rear brake drums for my 40 ford banjo. Must be like speedway and boling bros sells that slide over the factory hub.

I’m looking for a 1935 ford wishbone cup cap. I have one half but missing the other. Would buy a complete cup If need be. Thanks chris

I’m looking for an original adjustable filt-o-reg fuel pressure regulator

I recently received my new clutch kit for my 39 style trans. It came complete with a new clutch release hub and bearing. However it’s very different from the original and I’m wondering if I should run the original hub or this new style?

I’m in the market for a 10” clutch kit for my 8BA with a 39 style trans. None of the local parts shops in my small town can get a kit. I was looking at rockauto and they sell a kit by perfection clutch. I was wondering if anyone has had any experience or can recommend a clutch kit? I’m in Canada...

Im looking for a 36 ford fuel gauge, would buy a complete oil pressure and fuel gauge as mine is so sun beaten. Thanks Chris

Selling my Mallory dual points distributor. Never ended up using it, went a different path. Distributor is in Canada, but I’m traveling to Montana in a week and can ship from there to save on freight. Asking $250us

I recently opened my big logo 97 to rebuild it and found the idle tube housing is cracked and not useable. Does anyone have just the center body with a big logo they’d sell? Thanks Chris.

So I went to install my 59A heads onto my 8BA today and noticed the valve pocket in the 59A head is shaped completely different from the 8BA head. Also the piston area on the 59A head is much smaller than the piston area on the 8BA head. My question is will this affect my install, can i run...

i just installed new brass bushings in my 48-52 f1 pedals. I'm having an issue getting the shaft to fit into the bushings now so i can assemble the pedal assembly. Do these require a hone or anything? should it be a very tight fit?

I’m looking for a set of 24 stud aluminum finned heads that will accept a 400 lift cam. Prefer center water outlet but will look at 8BA style.

I’m looking for a performance cam or complete cam kit for a 48-53 8BA flathead