Search results

My 312 has a Carter Carb and the double vacuum advance. I removed the distributor six years ago. Now need help on routing the vacuum lines. One goes from the distributor to the manifold port below the carburetor, to either the top or bottom port on the distributor? The other vacuum line, I...

Need some advice on installing the windshield in a 56 Merc. There is a long SS Molding on the front of the top/roof on the Mercury Montclair and Crown Vic. Can the windshield be installed if the top molding is already in place? Gary Danford Chadron, Ne 816-258-2300

Looking for rear quarter panel Moldings for a 56 Mercury Montclair Hard Top. They are approximately 78" long. Also need the Drivers Side Molding that is about 5" long that fits behind the drivers door. Any leads would be appreciated. Gary Danford 816-258-2300

Need a photo or description of the rear bumper stone guard. It's the rubber piece between the rear bumper and pan where the tag light mounts. Description (width, length, type of material, one piece or is it a three piece. There isn't a 56 within a 100 miles of here. So any help would be...

Looking for the lower half of a 56 Mercury rear quarter panel. I see several companies sell the rear quarter panel for the Station Wagon. Does anyone on the Barn know if the lower half of the Station Wagon Panel is the same as the 2 Dr Montclair Hardtop? There are no Station Wagon's here in...

Looking for the "Montclair" script that fits on the glove box door of a 56 Mercury Montclair.

Item wanted is the shift position indicator for a 1956 Mercury with a Merc-A-Matic transmission. This indicator fits on the steering column and is made of plastic. The small missing part of the indicator holds a slide switch for the horn. Apparently pressing too hard on the horn ring breaks...

I removed the ignition switch because the key that came with the old car is worn out or the key needs to be replaced. I see you can purchase the key and the tumbler assembly without having to replace the complete ignition switch assembly. So there must be a way to get the tumbler assembly out...

Looking for the pulley that fits on the Power Steering Pump on a 56 Mercury.

I am doing a 56 Mercury with PS. Parts are hard to find for the Mercury but are parts available for a 56 Ford PS. From the photo's I've seen they appear to be the same unit. I would make sense that Henry would use the same unit on both Ford and Mercury. Does any one know for sure?

Looking for passenger side door trim.

I could use some advice on removing the trim above the windows (on the top) and all along the sides with out damaging it. Any help would be appreciated.

Looking for the correct engine color for a 56 Merc 312. There must be someone out there than has an original car. Gary

I am finishing up the 29 Town Sedan and since the car didn't have a complete interior I need some photo's. Might also add that I removed what little upholstery it had over two years ago. Having a major senior moment I guess. Anyway: 1. The back seat rest has a fold down center rest. I need...

Have a 85" speedometer cable in good usable condition. Someone had installed it in my (Oval Speedo) 29 Sedan. It was incorrect for my car but was working fine when removed. Photo available on request. Will ship for cost of USPS priority mail box.

I recently corresponded with Tom Jordan at Snyder’s (also a Ford Barn member) about the Cowl Band on the 28 and 29 Cars. I asking why Snyder’s haven’t found a supplier for the Cowl Bands. Tom’s reply was as expected, there are two problems. First you have the problem of supply and demand...

Looking for a 29 Murray Cowl Band that could be repaired and rechromed.

Now that I have my Model A running, would like to do some short trips and a little crusing. Of course if would be more fun if I could locate some other Model A'ers. There is a inactive club here and the members apparently don't get out, so I am looking for other Model A'ers that would like to...

I want to add one of those stop light bars that you put in the back window. I am running an 8 volt system in the car. Should I use the 12 Volt or 6 Volt light bar. Maybe neither one work with 8 Volts? Led's are a little too new for me to understand.

I wanted a Luggage Box but thought the Repro one's were far to expensive, so with some help, here at the Ford Barn, I built my own. Can't remember exactly where here on the site I found some basic plans and built the box. It came out, not as great as I wanted but better than I expected. Have...