Search results

can someone tell me what size tubing to use on a stock 46 mercury and where does the fuel come out of a new tank. the new tank does not have a opening at the bottom. thank you

does anybody know where the vacumm hoses go to on the switch? there is three ports on the switch and two on the motor,where do all three hoses connect to.i tryed to load pictures with no success.please help,thank you

a couple of years i removed the dashboard from my 46 mercury coupe and now ready to install it, if i remember right there was some type of gasket between the cowl and the dash. my question is,is there a gasket and what is it made of and where can i purchase one ? also do i need to remove the...

i am converting my 46 mercury to tube shocks,i have mounted the upper front mount but did not drill the hole in the front axle yet. i checked the distance between top mount center and where i think the hole in the axle for the lower mount should be is 17". a stock monroe shock for this car only...

i picked up some used 600x16 tires and plan on mounting them on 16"x4 1/2"rims with 600x16" tractor (implement tires) inner tubes, will this work?

i've got a question about the brakes on my 46 merc.they are all cleaned up and ready to put together.my question is,is there a position that the bottom cam #91a-2028 should be in,meaning the cam washer has a 90*angle in it how should that point be indexed ? (12 oclock,3 oclock ect) i'm not sure...

i have a 46 mercury with key broke off in cylinder, under the cylinder there are two (looks like pins)one is about 1/16"od and the other is about 1/4"od. are they threaded or pressed in pins? my question is how do i remove the lock cylinder. is there a step by step procedure ? thank you

does anyone have pictures of the brake and clutch peddle spring location from pin #7533toother end of spring on a 1946 mercury or ford that you can share. any information will help. thank you

Will 1946 ford dash board trim fit in a 1946 mercury dashboard

hey guys and girls,i am looking to purchace a windshield seal for my 46 merc with trim and looking at mac's it shows one with a price of $65.00. has anyone ever used this seal and it worth the price ? any other options? thank you

does anyone know what the diamention is between the two chives, center to center on a 46 mercury two chive crankshaft pully part #21A-6312? also,what should the fan blade diameter be.thank you all

help, i intend on putting this engine in my 46 mercury.came across this engine from a friend who claims it is a 46-48 engine.the bell housing says 59 L, one head is a 59A-B the other A,crab distributor but the fan is connected to the crank pully which tells me it might be a earlier year.i would...

i am working on my 46 merc steering box and have a few questions.i have never drove the car so don't know the condition of the steering box (play in wheel).the steering box is apart and found a small pitting on the worm gear.will this have any effect on the steering performance ? the roller gear...

got this (what looks to be a)rebuilt crab distributor and it seems to be ok except for the points do not look to be square or inline,will this have any effect on the performance of the distributor?i attached three pictures.i hope you can see what i mean.thank you all

Quick question,i have a cork clam shell seal in the package for a couple of years and is getting dry and hard to bend,is there a way to soften and make it more bendable? thanks,john

i am in the process of reasembling my 46 front axle.i did a search but could not find a way to install the top shackle pin to the the radius bar.i did clean the hole with a brake cylinder hone to help insert the new shackle pin but still to tight.i did not want to drive it in until i know if...

this morning i had gone toa well known machine shop here in phoenix that rebuilds brakes and clutch and resurfaces flywheels.i had asked them to rebuild my clutch disk and pressure plate which they did well.also asked to have my ring gear changed and resurface the flywheel,when removing the old...

hey guys i am in need of a ring gear for my 46 with a 59 ab.has anyone had any problems with the off shore repo's. do they fit properly and have they been known to fail or come off the flywheel.also the best place to get one for the price.yes and the price range$$.

hi guys,need some info on how to remove and replace the brake and clutch pedal shaft from its housing.any info will help.thank you

wanted,1942-48 ford/mercury radiator support cross bar.ford part #51A-5071.this bar goes from frame rail to frame rail under the radiator support.please PM me.thank you