Search results

Disregard. ooped

Does anyone out there run a pressurized radiator? Can you tell me how and where to mount the overflow tube? Thank you,

Four (4) 4.75 x 10" roller tires. Free You pay for shipping and handling

Can anyone tell me how the front backrest spring secures to the metal seat frame?

For Sale - Right and Left 3rd window frames. Right and Left 3rd window mechanisms. Sold as lot.

Disregard this post. These lights are not for a Model A. My original headlights have seen better days. How do I go about rehabilitating them? Were these headlights originally chrome plated? Thanks,

Have I wired the ignition switch correctly? Does it make a difference?

What changes are required to the attached drawing for using a 12 VDC Negative ground vs the 6 VDC positive ground? Does a similar drawing exist for the 12 VDC Neg Ground? thanks,

Wednesday afternoon, my A engine ran pretty well it ran well for almost 15 minutes and then just quit. I can not get it to run again. Today, a fellow club member came by to help. We were able to verify, 1. The battery is fully charged at 12.32 V 2. We could verify that we had a strong blue...

Can anyone out there in Model A land be able to tell me the dimensions marked in RED ? There is no vendor supplying the locking door handle manufactured per the attached. Thanks,

I am working on restoring an original windshield frame. It requires a lot of work. One thing I am looking at is the windshield frame nut. How is the nut installed? Is it pressed into the frame? Can it be removed? How should I install a new nut? Or, should I just sandblast it along with the...

I am having the right upper corner of my A repair welded this Saturday. My question is, after it is welded, what is the best material I should use to fill and form this area. Should I use JB Weld or POR15 Epoxy Putty? Thanks,

It seems to me that these door stops are a bit ratty. So, I am thinking that they need to be replaced. The problem is that I have no idea how to remove old door stops, nor do I know how to install new ones. Can anyone out there give me a hand? Thanks,

Two 31 parts. 1. Radiator Stone Guard - never used original condition, still in box. $100.00 + shipping. 2. Flywhell off 31 - nice condition, surface rust. Center bearing free, clutch face good condition, teeth in great shape. Free to pick up. If you want it shipped, let me know and I will...

One radiator cover, year unknown. Less than perfect condition. Needs work. Free + cost of shipping. No longer available.

Four gentlemen from the local Modal A Restorer Club came by yesterday to help me install to top on my 31 SW Model A. It was a herculean task. One step closer! YEA!

Can any body give me any hints on how the vacuum line is installed and how it hidden? Any help would be appreciated. Thanks,

At the risk of receiving the wrath from some Ford Barners, I will make this post anyway. The original vacuum line that came off the original body is plugged. Is there a trick for unplugging the tubing? Would it be better to try to manufacture/bend a now vacuum line? Thanks,

For some reason, I top horizontal piece of the windshield frame has five holes in it, on the left side. The windshield washer goes thru the header, not the window frame. Any idea what the holes in the frame are for? Thanks,

This evening I dry fit the left rear brake light and the brake light mounting bracket. Everything seems to fit together correctly. Except, as assembled, the brake light turns down slightly. Is this correct? If I have assembled all correctly, there is no way to adjust any of the parts...