Search results

Hey Guys, good friend just picked up a 32 Roadster and needs to find rumble seat springs, back & bottom. Any suggestions on who might have those? Thanks much!

Guys, On my 33 Pickup I damaged the front drive shaft roller bearing thrust washer when trying to remove the grease seal in the drive tube. This thrust washer is between the grease seal and roller bearing. I can find no part number for it or references to it in any of my literature. It looks...

Guys, On my 33 Pickup I have a standard 3 speed ******. Not sure what year the ****** is as it came with the truck but I believe its 33-47. Maybe someone can advise me on how to tell the year. Anyway, I'm chasing an oil leak. Oil is coming out of the output bearing, caged ball bearing, and into...

Guys, I've been pulling my hair out as to why I can't get spark on my 41 V8. New points, distributor set up on machine, coil checked out good, new condenser, and new solid core wires. Just finished complete rebuild of Dads old hot rod engine. Anyway, I thought I'd check the continuity from the...

Guys, I'm trying to separate the hood hinge joint on my 33 Pickup and need advice. The side panels came apart easily once I drove the 1/4" rods out, but I can't see what to do on the center top hinge joint. I have driven in a 3/16" rod about 5" but that didn't seem to push any rod out the...

Guys, I'm putting back together the front end on my 33 pickup and need to know the exact elevation of the radiator feet supports in relationship to the bottom of the frame so that I can weld in new supports. I have the front to back figured out using the hood and grille shell. If someone that...

First off I'm not sure if the 33 pickup and car had the same horn button/light switch assembly. I have a 33 pickup so that's what I need. I don't need the light switch rod as I'm just filling the hole in the wheel. Thanks Peder

Guys, I'm rebuilding my Dads 41 flathead. The distributer is the 37-41 style with the 37-41 caps and rubber boots. I must be missing the metal tubes that run from the rubber boots up along the heads where the plug wires come out. I had an old set off my 35 Ford and they don't even come close...

I need a 33-34 brake pedal for my 33 pickup. Someone cut it off at the hub years ago. I believe the part number is 40-2455B and it is 13-1/4" long from the hub to the outside of the 90 degree bend in pedal. Please PM if you have one. There is also a side fork that comes off the hub to pull on...

Guys, I'm looking for a 39-41 crank pulley, single belt. With or without fan flange. Some part numbers I know are 91A-6312, 81C-6312A. May be other numbers that fit. Shaft size is 1.31".

Guys, I'm dropping my Dad's 41 Merc engine into a 33 Pickup. Missing the crank pulley. Will be using the fan mounted to the generator so don't need the flange on the crank pulley. I know I want a single groove fat belt, but don't know what years will fit in either Ford or Mercury. The shaft...

Guys Working on my 33 Pickup field find and think the bottom seat spring is wrong but I'm not sure. The bottom spring is not the same shape as the metal seat box. The box is tapered on the ends where my bottom spring is not tapered on ends. Unless the spring sits on wood, does it? If it sits on...

Guys Just started in on 33 Pickup. Hasn't driven since 1963. The steering box needs to be replaced. I want something vintage, not after market. Not sure what the current box is off of but it's turned 90 degrees and about a half inch from old header. What years of gear boxes should I be looking...

Guys, Finally got the 35 on the road and I have some type of steering problem. This project was a multi-year ground up restoration that I purchase as project, so I have no history on how the steering was before. When the front wheels are off the ground, the wheels turn freely side to side...

Looking at a real barn 33 or 34 Pickup find but I don't know how to tell the difference and I can't seem to get to the VIN. The left front fender covers up the top of the frame inside the engine compartment where I think the VIN is located. Any advice? TX, Peder

Guys, I have a late model 35 5W coupe. Does the rear window shade have guide strings on either side? The old shade I have has a small loop in each end of the wooded stick on the snap end of the shade. An upholstery guy tells me the loops are for guide strings. Is that true and where would...

Looking for a rear window roll up shade assembly for my 35 coupe. I don't care about condition of the fabric, I need the assembly. Thanks, Peder

Guys, I have one bad water pump and was going to install a new kit in it. The kits all have shafts with a pin for holding on the pulley. My water pumps, both sides, don't have pins that hold on the pulleys. Are my pulleys pressed on then? Can I press the shaft out and put a new kit in it...

Guys, I could use some help. I have a 35 5 window coupe and the door glass doesn't seem to be the right size or fit. The guy who cut my glass has been in business for 40 years and has all of the original old glass patterns. His reference book and patterns match. He cut the door glass...

If my 35 originally came with bumpers and I want to use felt for a better seal, do I drill small holes around the window openings and garnish molding and use small flat head screws to hold it on? Do I also use the bumpers or is it one or the other? Thanks much, Peder