Search results

Pile of parts- GOING TO TRASH SOON! I have a pile of used and repop parts for Model A, nice parts, and rusty parts. Includes a transmission. Shell for the radiator has been sold. Rear diff has been sold. MAKE OFFER!!!!!

I have a November’30 complete engine and transmission and extra internal parts for sale. Engine appears to be in excellent condition, I have neve heard it run. A4140179 engine stamping. Transmission appears complete also. I have EXTRA- new rings, valves, lifters, guides and springs to go with it.

1930 Murray body Town Sedan. Runs and drives as it should. Not modified mechanically only the paint and wheels are changed. Interior is worn but functional. All steel with some rust/rot in the cowl and patches in the fenders. Nice driver. Replaced the timing gear, cleaned out the oil pan, and...

1970 Mustang Grande has a 302 short block that comes with it. No title. Was a 351W. Has the FMX Transmission. PS, power disc brakes. Needs complete restoration, not a complete rust bucket. Lots of parts come with the car. Make offer or possible trades.

Can anyone tell me the correct ohms for the fuel sender and gauge? My 56 Vicky has the original gauge but I don’t believe it has the correct sender.

1967 Galaxie hardtop. Complete car. Title, ambitious restoration or parts car. Does not run, engine is apart. Located in Chatsworth NJ.

Hi, I have a set of 30-31 headlight assemblies that have been converted internally to 12volt halogen bulbs and reflectors. These are in very nice condition. I would like to trade for an unaltered set of complete headlamps. I will be bringing them to Hershey on Thursday if interested.

Dumb question, should the windshield frame hit the gas cap when opening it to its' fullest position? I have to remove the cap to extend the windshield all the way out, then put the cap back on.

Hi everyone, what secures the rear seat back and bottom to the car in a 30 Town Sedan? These hooks were bolted to the woodwork but not anywhere near where the seat back brackets are located.

Homemade seats I pulled out of my Town Sedan. They have what appears to be correct wood bases but no springs. Instead they have high density foam wrapped in red vinyl covers. They work well, just look odd, but can work for a driver until you get correct seats. Make offer. Located in South Jersey.

Hi, I have a 1930 Town sedan and I need seats for it. Are the seats specific to the Town sedan or can I use a coupe seat for the front, or any other body style seats for front or rear? I would prefer correct seats, but I'll use any sytle original Model A seats just to have seats. Thanks!

Hi everyone, I need to replace my flywheel because about a third of the teeth are broken off. Is it easier to remove the engine and leave the transmission in place, remove the trans only or pull the engine and trans at the same time and pull them apart on the ground? Thanks!

Hi everyone, what are the interior panels made from in a 30 Town sedan? Specifically, what does the fabric attach to, card board, wood, or is the fabric just stretched and attached directly to the wood body structure? Thanks!

Hi, is there any way to tell besides seizing up the valves to tell if oil is getting pumped up by the oil pump to the valvetrain?

Hi, so with all you guys and gals help, I got the rear float a motor mounts out and aligned the engine left and right correctly. Now beyond removing/loosening the rear mount bolts in the correct mounts, what else has to be loosened or removed to jack the engine high enough to get the front float...

Ok, so why would the opening in the radiator shell line up with the bracket that’s u-bolted to the cross member perfectly but the crank pulley is about an inch too far to the right for the hand crank to engage? The bracket is centered and the radiator is centered, and the engine appears straight.

Hi Barners, I have an alignment question. When I turn the steering wheel to the left all the way to lock, I have about an inch or so before the 17” wheel I’m running touches the brake rod. If I turn the wheel to the right, it hits the brake rod before it gets to lock. Is this an alignment issue...

Hi, does anyone have any Front steel fenders for a 31 Town sedan? I’m looking for driver quality, prefer original but I’ll take used repops. Near south Jersey. I don’t have a ton to spend on them. Thanks

Trade 17” rims and tires Looking to trade my 17” rims with wide white walls with good tread for original 19” model a rims with good tires. Prefer black walls but not a deal breaker. Any color wheel is fine.

Hi Barners! Is there a difference between a 1930 Murray Fordor 3 window and a Town sedan, or are they different ways to describe the same car?