Search results

Hello fellows-- I just acquired another 1932 aluminum oil pan from a neighbor up the street. It differs from my other one in several respects. One is that there is no circular sump on the inside bottom. Two is that it does not have a casting date anywhere. Three is that the oil drain hole...

I hope some of you guys can give me some sound advice here. Engine is a stock recently rebilt 21 stud with a single 97 carb. Car doesn't get driven much. Has been running poorly, stalling out instead of idling. I found the carb was far out of adjustment (don't know how that happened, I...

Some years ago I obtained 1928 Business Coupe. It was a badly worn but fairly authentic old restoration done in Niagra/Duchess Blue. All the interior metal trim was painted body color. The DeAngelis restoration guide, which I consider to be the most authoritative, states on page 66 that the...

Does anyone know of a source for these? Nacewicz does not list them. They are round brass, approx. 5/16" x 7/8", tapped on one end for 10-32 and the other end has a slight knurl for a finger grip. You cannot use the regular hex nuts on a dual temp due to impaired clearance. They may also be...

Hello fellows-- I have a 1928 business coupe with a firewall date of 12-27-28. It did not come with a fan shroud when I got it. I bought a shroud at a swap meet and am now trying to install it. The shroud has four metal tabs for attaching to the radiator.The radiator has two metal "ears" on...

Need center top bow for 28 roadster pickup. Either a used one or a source for reproduction. All my parts catalogs list only the complete assembly. Please reply to charles0644@aol.com Thanks, Chas Seims

Does anyone know a source for individual parts for a 28-9 roadster pickup top assembly? All my catalogs list is the wntire assembly. Need just the center bow. Please reply to charles0644@aol.com. Thanks, fellows

Want to buy a pair of virgin front brake drums/hubs for a V-8 64 Mustang. These are 10" in diameter and are smooth without fins. I am looking for a pair that is the full 10" diameter and has never been turned. I think these same parts were used on other Ford products in the early 1960s...

I acquired a set of rumble hinges from a 32 roadster that was in long storage since the 60s. Cast in is the number 10-41546, the symbol A and a hexagon and the number 1. Along the round area where the pivot bold goes is the number #41547 and #41548 on the other one. These numbers are close to...

Hi all--I have the following surplus 1932 parts for sale: COMPLETE STEERING ASSEMBLY: includes steering box, column tube. ignition lock assembly complete with switch can and contacts, good useable steering wheel (very rare) and light/horn rod. The toggle on the ignition switch is broken off...

Have a 32 ignition/steering lock for right hand drive car. Missing lock cylinder, on-off plate and all the switch parts that bolt to the back. Good toggle. Some hacksaw cuts on the front that are easily filled. Has been bead blasted. E-mail me at charles0644@aol.com for pix. $100 or best offer.

I have two Southwind heaters for sale. One appears to be complete and is in very good condition. The original gray hammertone paint finishes has a few scratches but is good enough appearance to use as is. The chrome air deflector on the bottom has some surface rust but should clean up with a...

I have two Southwind heaters for sale. One appears to be complete and is in very good condition. The original gray hammertone paint finishes has a few scratches but is good enough appearance to use as is. The chrome air deflector on the bottom has some surface rust but should clean up with a...

I have two Southwind heaters for sale. One appears to be complete and is in very good condition. The original gray hammertone paint finishes has a few scratches but is good enough appearance to use as is. The chrome air deflector on the bottom has some surface rust but should clean up with a...

I have two Southwind heaters for sale. One appears to be complete and is in very good condition. The original gray hammertone paint finishes has a few scratches but is good enough appearance to use as is. The chrome air deflector on the bottom has some surface rust but should clean up with a...

I have two Southwind heaters for sale. One appears to be complete and is in very good condition. The original gray hammertone paint finishes has a few scratches but is good enough appearance to use as is. The chrome air deflector on the bottom has some surface rust but should clean up with a...

Pair of 1953 "Crestline" script front fender stainless. Fits convertibles and vickies, maybe others. These are like new, possibly NOS. They have a few fine scratches representing shelf wear, and most of the black paint in the script is gone, but they're otherwise perfect. Email charles0644@aol...

Would like to buy a "shark fin" 1932 jack and folding handle, B-17081-A1 or A2. Have 48-17081 A1 and 8C 17080-B jacks for trade if wanted. Also looking for one only original 1936 Spider hubcap, perfect condition or one needing very little work. Please respond directly to: charles0644@aol.com...

Would like to buy a "shark fin" 1932 jack and folding handle, B-17081-A1 or A2. Have 48-17081 A1 and 8C 17080-B jacks for trade if wanted. Also looking for one only original 1936 Spider hubcap, perfect condition or one needing very little work. Please respond directly to: charles0644@aol.com...

Does anybody know a source for the authentic fibre webbing for the radiator shell and firewall sides for the 32 Ford? It doesn't seem to have been available for many years. What I want is 5/8" wide by 3/8 thick, olive (army) green in color, quite hard. The reproduction stuff that Bob Drake and...