Search results

having trouble with what I think is vaporlock. What are people using to plug the heat holes in the intake manifold? I do have old original coil and condenser, that could be the problam

want 35 intake manifold

I have a 35 with stock motor. And new higher volume water pumps. Recorred radiator and no combustion leaks. At 45mph no problems, but at 55 mph t will throw about 3 qrts. out the overflow in about 10 miles. Flow Is a lot of volume even at idle.I am thinking of removing the impeller shafts and...

installed new fueline and felt seals. after couple of weeks they started weeping fuel. Tightening didn't stop it anyone use something different?

installing new tires on my 19 touring. One of the old tires was notched for the valve stem the other was not. Watch some video on tire installing, they didnt say any thing on notching. what is correct?

Need to send my fuel gauge in for repair, can I remove just the fuel gauge or do I have to remove oil pressure to as a unit?

just bought a 19 touring, it has an anderson manifold. Is there any performance advantage with this? Seems to have more get up and go than my 27 coupe. But the coupe has a vaporizer carb. Not real fond of the looks of the Anderson

Installing a 37 steering box in a 35 coupe. when using the 35 mount which hole gets redrilled. the top slide hole or the bottom round hole? I have a 37 mount but think it be easier using the 35 mount with the car all together

Installing a 37 steering box in a 35 coupe. when using the 35 mount which hole gets redrilled. the top slide hole or the bottom round hole? I have a 37 mount but think it be easier using the 35 mount with the car all together

I have a 36 feul gauge and new sender unit that is compatable with the gauge, The reading was very erradic for a time and finally quit. Found out the battery was hooked up neg. grnd. (6 volt) That has been corrected. The gauge still shows nothing.Is there a way to check the units with a meter...

How do you tell if brake fluid in a car is Dot3 or Dot 5

Went to charge the battery in my stock 35. Noticed the guy who did my wiring hooked it up Neg. ground. Wouldn't that be running the current the wrong way through the coil? (helmet) All gauges work except the 36 feul gauge and sender. What is involved to changing it back to positive Ground?

Does the 37 short block sit higher in the chassis than a 35 ? 35 Fan will hit the radiator. I do have a 37 manifold that would lower the generator and fan. Car is not a judgable car. Ju.st a very pretty driver. I have a 37 fan, if the blades were put on a 35 hub I think it would have...

Need to remove radiator on 35 coupe Do I just remove generator and distributor, or do I need to remove the grill

I have a 37 block in my stock 35 coupe. have the 35 heads and other 35 parts. What is the proper intake manifold for a 35 ford. I have intakes that have generator bracket 3 inches-4 inches and 5 inches high. I am sure 5 inch would be too high. They are all aluminum. Also the car will never be...

Have a 37 block in my 35 coupe. I don't have any aluminum heads. I have two sets of cast iron heads. 68-6050-B---Enclosed pump bolt---Large spark plug hole---No Ford script---Flat over piston 68-6050-B---Ford script---Small plug hole--exposed pump hole---dished over piston. My pistons are...

Ineed a 35 spare wheel cover for 600-16. What are the size of the center opening and the over all size. Every body advertises them for 32-39, I know that is not right. Dave

I have a 35 coupe with a 37 ****** and top tower. Will a 35 shift lever work on this or are they different? Maybe I could just bend the 37 lever to match the 35 bend? Dave

On taking apart two worm drives to make one good one, I found the bolts were very loose that bolt the carrier and brass gear together, on both carriers. Is this common, are the bolts to soft so they stretch? Should they be grade 8 bolts with fiber lock nut? Dave Rezin

October 11, 2014 Fairgrounds-Tomah,WI 1929 Model A-60 Briggs Body, Leatherback, restored 1930 Model A 2 Door Sedan Deluxe Model, restored 1 ‘28 engine clean, 1 engine in parts, 4 bare A engine blocks, 5 transmissions, head lights, jacks, tire pumps, heaters, ignition systems, radiators, engine...