Search results

Is there a single groove/single belt option for a 59ab Crankshaft pulley, or is the only option to cut off the front of a double pulley?

I have a knocking noise that started while driving the car it is coming from the bell housing area. The noise started after I ran out of gas, put gas in the car and was heading home. the noise goes away when the clutch pedal is in and the clutch stops spinning. I have viewed this through the...

Hey guys, I have a fresh installed 59ab in my 33. I noticed a squeak/chirp coming from the front of the motor and after investigation I have found that the crank pulley is rubbing the oil pan lip. The motor came with a double pulley on the front and I only needed a single so I took the crank...

I am getting a noise when I am engaging the clutch. I have taken a video and you'll see its when the throwout bearing is first coming in contact with the PP fingers. Once the bearing is full engaged, it is quiet. It is only when the initial contact is made, prior to any inward movement of the...

I have a greyhound but would like a regular cap for driving around since the greyhound bounces loose when I hit bigger bumps.

Can a 59ab be dropped into a 33 ford coupe with water pumps and fenders attached? I am trying to put a 59ab in my 33 and it looks like the motor mount wings of the pumps are going to hit the inner fenders. Thanks Brad

Anyone know where I can get some of these? All of the suppliers I have checked seem to be out. Brad

As some of you know, I have been fighting several issues with my 35 Flatty. Timing, bent valve, running rich, etc... I finally got the motor running decent, not perfect but good enough for a little while. Anyway. Went for a about 30-40 mile drive Saturday morning. Car ran good. I pushed it...

I am getting good compression on all cylinders but #8(30lbs). I pulled the head and intake and can see that the intake valve is not seating. I put a light in the intake hole and can see light around the edges of the valve in the closed position. Can anyone tell me how I should proceed with...

I have been fighting an issue with my engine running rich. Some background info: I am running a Stromberg 97 Carb rebuilt by Max. I have a mechanical fuel pump with a sediment bowl. It is a new pump but I used the spring out of an older pump to get the pressure down to around 2lbs. I have...

Guys, I got my 33 on the road back in October and after working out a few bugs she is running great. I have a 35 flathead in it that was rebuilt sometime in the 90's I believe, but had no miles on it until I started driving it in Oct. When I am driving the car, fumes are entering the cabin...

After 8 long years, I finally have my grandfather's coupe back on the road. Drove around a little Thursday afternoon staying around 40-45mph and towards the end of my trip, a little coolant sprayed out of the top of the radiator. It was on a downshift and I chalked it up to that since the temp...

I have a weird fuel pump issue. I am installing the fuel pump with the pushrod at the top of its stroke. Before I put the nuts on the posts I can push the pump stand down several times and fuel pumps into the bowl and out the pump towards the carb. From that point, without removing the stand...

Can some one provide some pictures or insight into where the rear window drain tube exits the car and what type of attachment is it? Thanks, Brad Sent from my iPhone using Tapatalk

I have the original hydrostatic gauge for my 33 but the small tube between the reservoir and glass tube is clogged. I am currently soaking it in phosphoric acid, but if I cannot get it unclogged, what are my options for a fuel gauge? I know I could try to find one that is operational for sale...

Is there a gasket/weather strip that goes between the windshield frame and the body? It seems to me there should be something there to waterproof it. Thanks!

I pulled the rear hub on my 33 and it seems to me that the backing plate is rotated almost 90 degrees. Is this how it's supposed to be? Does it matter? Sent from my iPhone using Tapatalk

I am looking for fenders for the passenger side of my 1933 5 windows coupe.

I am mocking up my car and have the fenders attached. I cannot figure out an easy way to bolt the grill to the pie shaped deflector and the fenders. It seems to me that there should be cage nuts around the inner chin of the grill, but my grill(which I believe is original) does not have any...

I need some help. I have search the forum and found a few things but nothing exactly like I am experiencing. He is what I m dealing with. I have a 35 flathead in my 33 5 window. I am still in the process of getting my car back on the road so keep in mind that this is not a road worthy car. I do...