Search results

Here are photos of a load of Model T parts I purchased today and brought home. Haven't sorted all the way through them yet, but previous owner said the motor in the stand rolled over freely with a crank. It is supposed to be a 1922 or 24 according to what he looked by the numbers on the block...

Lot 7 - 28-29 headlight original buckets with all the new reproduction parts to make them 12V Halogen headlights. I have these priced for a fair amount less than I paid for them on that infamous online auction site. Now need to sell so my loss, your gain. $260.00 and shipping is on you. Lot 8 -...

Groups of parts for sale in 'lots'. Most have shipping included in the price as long as in continental 48 states, but just a few are priced without shipping - all will be noted in the descriptions following and then photos: Lot 1 - New door bumpers, horn brkt., light switch bail, speedometer...

Looking for complete original front seat and same rear seat for a 1946-48 Ford Tudor Sedan. Don't have to be refurbished, but would want them to be complete - also not bunch of broken springs (few OK). Needing cleaning up and reupholster is the condition I want. Because of size constraints it...

**Price Drop $1300.00** 1947 Ford Tudor Sedan for sale July 29th Update: If I haven't sold this in one piece by mid August I will PART IT OUT. Prices - * fenders $225.00 each or $800.00 for all four at once. * hood and trunk lid $225.00 each one or $400.00 all at once. * rolling frame and...

I have 4 1929 Chevrolet disc wheels for sale with 5 outer rings for the demountable part. 3 are in super shape, just surface rust - a light media blast would really clean them up. The fourth has some rust through in the portion outer rim bolts to. Thought there might be some Model T speedster...

SOLD - transmission by itself, but would sell the rest by itself now if you are interested! SOLD - Conversion kit for Model A to convert original rear axle to open drive line. AA bell housing, needed when using the T-5 adaptor kit below - $110 Adaptor kit to adapt T-5 to AA bell housing -...

If I really was in business I would call this "concentrating on my core interests" :rolleyes: After reflecting on the state of my 'workshop' and the amount of clutter there I have decided to sell most, if not all of my Model A parts. I will list some now and then add photos ASAP. More will be...

Motometer has been attached to a Model T radiator cap, but could be removed and used on any other car of like vintage. Chrome appears to be good - haven't stuck the end down in hot water to see if the unit actually works, but plan to try that and report back here. Shipping is on the buyer and...

T frame has been sold! Thanks for looking. T frame for sale - looks to have been blasted and primed. Brake handle has Ford script on side and on clevis hook-ups. Pick this up in Columbia, MO. Also looks like front cross member may have had a repair at some time earlier. All the rest looks...

News Flash! - when I took the upholstery out of the box to take photos I found that Mickey and Minnie Mouse and some of their kin had feasted on the upholstery in two places - see photos. Not beyond repair at a good upholstery shop AND a good way for you to save some money due to my misfortune...

**Reduced Again** 1928-1929 Murray four-door body sills - Brand New in Box! This wood kit is sold pending receipt of Money Order! Thanks for all the interest. Jay I have a brand new in-the-box wooden sill kit to fit a 28-29 Murray four-door sedan that I purchased and didn't end up using...

I have a right rear fender for sale that is in really decent shape. No splits in the bead and the rear attaching edge is not beat up or split. The edge of the outer part will need just a little bit of metal shaping because of some small bumps along that area. But overall a great fender...

The only way to make it through the winter for me is to look ahead to the swap meet season. I want to attend the Jefferson Wisconsin swap in April and wondered if it has a lot of Model A parts and other pre-war stuff or if it is mostly post-war and muscle cars?? Thanks, for any comments and...

I have a pair of 1928-29 CCPU needing the bottoms replaced - isn't that a surprise! I have purchased the patch panels and door inside panels already to repair them, but they are sooooooo bad that I can't tell where to position them to end up with the correct size / length. If someone would be...

I have a couple of 1928-29 CCPU doors that need repair at the bottoms - don't they all?? Has anyone used the ones supplied by the main Model A parts suppliers? If so did they fit well - correct crown, bead, etc. Also, need to replace the inner part of door on both. What about the patch panels...

As I am getting a bad case of "Spring Fever" I've started to attempt to see which swap meets I would like to attend in 2013. One I have always heard was a good one is the Chickasha pre 1945 only swap in March. While I was surfing around looking for a website with the 2013 dates (which I did...

Price adjustment on 1/26/2013 - lowered to $125.00!! For sale: Driver's door for a 4-door sedan with Murray Body - quite good shape! Solid metal with half of door hinges, door locking mech., window winder and glass, inside garnish molding, plus outside handle. Needs some wood work...

I have a really nice steering box from a 1953-56 F-100 I would like to sell. It came off of a truck that owner was 'clipping' front end with new IFS. Present owner was best friends with previous owner (deceased) and knew history of truck. Previous owner had secured grant money to build the '53...

January 5th update - subframe is sold pending payment. Thanks for all your interest!! I have a set of sill plates for a CCPU 28-29 for sale. As you can see in the photos it is in quite good shape. Sure, it will need a little welding, but check out the price for a new reproduction set!! I...