Search results

I'm looking for light brown or tan, whatever the color was, windlace for my 29 std coupe. Was it 1/2-inch diameter?

I have been looking all over the internet and cannot find this to make new kick panels for my 1929 coupe. Is it even available? I also looked thru my parts catalogues.

I'm installing my restored Heinz wiper and it seems to close to the windshield as the wiper blade binds up against the wiper housing. It seems like the wiper is sagging down. Also, in running the wiring I do not see a hole where the wiring can drop down and connect to the wiper connector. Thanks

What is better to use under rain gutters and hideem welt, Loctite flashing and roof polyurethane sealer or 3 M fast and firm sealer. Should I put a little sealer in the hidem welt before I fold it over? Thanks

I saw on an earlier post the use of a modified 30-31 support on a 29 steering column. Any other ideas as to how to support the 29 column to keep it from cracking the solder on the lower support.

I have a 29 coupe with a late 31 carb on it. The gas line goes directly into the carb with no side bowl filter. I do have the glass sediment bowl on the firewall. This was the setup on the car when I bought it in 1959. Is there any advantage or disadvantage to this set up? Thx

Is there a market for these? I have two that I pulled off of my 29 std coupe a few years back. They had actually come off of a homemade trailer some years before that. The tread is good and the red label is still there. They are 21 inch.

What do you use to seal either wire-on or hidem welting and do you use it both underneath it before you tack it on and then also in between it to seal it closed?

How many of you have a late 29 std coupe? I don't see any restored ones shown in the magazines after the meets and when I ask specific detail questions here on that model it is sometimes hard to get answers. I know it is the poor mans model and many were turned into hot rods but there have to be...

Installed an oil retainer tube on my 2 sector steering box and when I reinstalled the light switch connector block the light switch was very touchy as well as the horn. Does this mean that it may be shorting out or not making a good connection? There is only one way that it can fit into the...

Notice it was low on oil last week so added some and it looks like most of it drained out!? It has been steering fine. Can I just replace the gasket behind the endplate and can it be done in the car? I only added enough so that I could see it about 3/4 on an inch below the plug? Used the 600...

I want to add some oil to the gear box. How full do I fill it? When I took the plug out it was moist but not filled to the plug?

Just installing my rebuilt shocks. Had them rebuilt 2 yrs ago and they have been sitting in the box. I assume the fluid is still okay since they do not leak and have not had the plug off. The arms moved fine when I installed the links.

Have new roof on my 29 std coupe and am ready to reinstall the rain gutters. Never had trim on it since it had a tin roof before I replaced it! Can someone please send me pics of what the trim looks like? I have not been able to find a previous thread on this. Am going to use hidem on the front...

Does anyone know if Troy Burkart is still in business? He restored my wiper over a year ago. I am getting ready to reinstall it in the car and have some questions about the rebuild and he is not responding to my emails!

Finally got the vinyl on my visor after many years without! When installing it on my 29 coupe do you place any type of sealer between the visor and the header to keep water from seeping in there?

What is the best voltage reducer that the vendors have to reduce the voltage from 12-6 on my windshield wiper? Or you who have done it, do you order the one that Les Andrews shows in his manuals? Thanks

I am installing my restored wiper and connecting to a 12V system. What is the best reducer to use from the vendors. I see there is a rectangular one and a circular one. Do I mount it up by the wiper or on the inside fire wall?

Replaced my water pump and now cannot get the upper hose to seal on my 60 yr old after market radiator!! Added JB Weld to the dents but the clamp on my red hose is cinched as tight as it can go and it still seeps!!! Are the reproduction hoses and clamps a little oversized these days? Any...

About fried the wiring to the alternator today when I hooked my headlights back up!! Was I getting a short through the metal conduit by having one of the 3 metal bullets maybe touching the conduit? I was using the plastic insulator. Worked fine before I had to take it apart to work on the...