Search results

I'm looking for an emblem and lower grill clip for a 40 barrel nose truck, any ideas where to look, pictured is the drives side I need the passenger side. Thank you

Working on a 59AB its in a 34 1 1/2 truck, gas tank is under the seat. If it sits for a few days it won't start,its not getting gas, the carb is empty, I have the fuel line looped above the fuel pimp but that didn't help, if I pour a little gas in the carb it fires up and runs and will start and...

I'm looking for the wiper arm for the 29 electric wiper motor, places I've tried say no longer available, do any of you guys know who or where to look for one,plus the off on lever. Also looking for a set of rear fenders for a LATE 31 pickup, square wide bed, any leads. Thanks Aaron

About ready to get the sport coupe out for a test drive and the generator wants to charge well over 15 amps, new battery, Optima, fully charged, new cutout, the old one would not function, this generator doesn't have an adjustable third brush, what do I have I see no numbers and it is an A...

I looked thru a bunch of the windlace posts and one made mention of the rivits that hold the windlace cover on the A pillar, this car had # 8 machine screws and nuts holding the metal cover on, that didn't seem right and the top 3 on each side under the A pillar cover were missing so I'm...

Starting to go thru some things on this 29 sport coupe, I did get the optima battery bracket built and installed in the orginal spot, haven't started the car yet but one glitch at a time, the owner didn't have the ign key and it was a standard type ign switch with a screw on bezel on the...

Now that LeBaron has closed where can I get kick panels and panels for the rumble seat area for a 29 sport coupe and a little later a new top and wood kit, the top will hold together for now but later this year I may put thwe wood and a top. Thanks Aaron

Still working on the canopy express BB, I haven't been happy with the way it runs, the timing has been giving me fits, so I bought the Nu-Rex timing wrench thinking I was too stupid to time it with out, it ran worse so now I'm digging into it and the dist plate has had the slot for the advance...

I located the correct cable for the 4 cylinder carburater and was starting to install it where the wrong one came out, which was on the right side of the instrument cluster, but I now notice there is a hole dead center at the bottom of the cluster that has a partial flat spot in it like the...

I'm working on a 32 BB 1 ton the stop light switch has me puzzled,its mounted on the cross member after the brake pedal and it is pulled to the on position with a piece of wire and a spring when the brake pedal is pushed, problem is the switch is on already and the pedal pulls it off, I googled...

I'm starting work on a 32 BB 4 cyl, it likes to blow water out of the radiator under load, no water in the oil, I'm thinking possible rad or block plugged,pulled the hoses, ran water in both,it is pretty much instant coming out the other side, of block or rad from both directions, somewhat...

With todays gas does reading the spark plugs tell us anything, will they still show a lean or rich mixture, I pulled the ones out from the 59 AB I just went thru the carb on and they are almost as clean as they came out of the box, hardly any color on them just a slight brown tinge,they've got...

I'm working on a 59 AB with Ford 94 carb on it,its in a 34 Ford 1 1/2 ton truck, cold it starts right now,run to town shut it off it'll start with in afew seconds before the fan make s a complete turn, go in the store and come back out and try to start it'll almost run the battery down when it...

I'm looking for the trim on the door post and upper rail over the door that screws over the windlace on the doors on a 32 to 34 pickup/truck cab,does anyone have a part number for it, just in case someone has some nos floating around or anyone have some good used. Thanks Aaron

I've got a 32 BB in the shop that after running for a bit usually driving that blows water out of the radiator, I disconnected the hoses and ran a garden hose in the rad and I get water in water out almost instant, the same on the block, I flushed it from the head and the incoming water side no...

I did a quick search and didn't find an answer about fittings on a 34 under seat gas tank, I need to remove it and clean it, the truck has been running on an aux side mounted tank and I want to run it on the seat tank again as we're not going to do 300 mile distance trips in a 3 axle 1 1/2 as...

I've looked all over the forum for the float level on a model 59 carb,it has the 59 on the left side and 94 on the back of it, I wanted to check that and then the fuel pressure, the early V-8 book I have doesn't cover the later engine or carb 15/32 doesn't look to be the setting on this one.

I'm working on a 34 1 1/2 ton truck with a 59 AB in it, this one has a steel oil pan, the one I just bought to put in my late 31 pickup has a cast oil pan if I remember correctly, mine was out of a truck but i don't know what the other is out of,is there a difference between early and later...

I'm looking for a distributer that sells motor and trans mounts to put a 59AB into a Model A using the 39 top shift box also the adapter for the clutch and brake pedals that bolt the stock pedals to the 39 box, I've searched this forum and read some good posts, several have said about kits for...

I have a chance to pick up a 59AB its all there fan to flywheel no trans,heads were off some time ago and there is no ridge,valves looked good I was told it may have little us eon an over haul, I'll most likely pull in down to check everything over,new seals,gaskets and put ti back together, I'm...