Search results

Whats the best way to remove wax in a paint scratch prior to touch up.

I'm not around my car or manual and search was fruitless. Can someone please tell me what size socket to use for the lug nuts? Thanks

When servicing the gear box, what type of grease should be used?

Can someone tell me the size LED replacement for the instrument panel.

On a cold start up there is a 30 second engine knock briefly. Where should I start to look?

Question about centering front brake shoes. I welded the worn roller track and ground to 1 5/16". Had "Snyders" mount new cast drums on hub, install new bearing races, true the drums and arched the shoes to each drum. The centering tool indicates the top of the shoes has a gap compared to the...

Brake ? Starting to re-assemble brake backing plate to spindle. Diagram shows castle nut on the rear of plate. When I removed it originally the castle nut was inside the grease baffle. I like that the threads were protected that way. Does it really make a difference?

On my new purchase the car had broken speedo cable. Replaced with new insert. That lasted 18 miles. I noticed the outer cable spiral was once possibly slightly kinked at both ends then tape covering the split cable. Replaced the entire cable assembly. That lasted 80 miles before it broke. All 3...

The brake pedal doesn't come back even with the clutch pedal even with all the rods disconnected. It isn't this way in my sport coupe. This is a 29 Fordor. what am I missing or cant see. I can't return it even with the clutch pedal, even by pulling back by hand with all the rods disconnected

what is the best way to remove musty smell from inside the car?

How do I remove the mercury thermometer on the flying quail rad cap? Can't figure it out & don't want to break anything. Thanks in advance.

When driving the wiper blade seems to fall slowly while not in use. It seems that it snaps into a holding spot when up & not in use. Is mine worn or should I be looking at something else?

New to Model A's. My speedometer is bouncy, sometimes it is steady but most time not. Is this normal?, or is there a problem. Thanks in advance.

Horn wires were soldered inside the conduit. When I disconnected I forgot to mark what was which and the wires are different colors out the horn that don't match the supply. Does it matter how they are connected?

Removed my distributor to torque the head and did a carb rebuild. All back together. It runs nice and smooth except I have no distributor advance, the plate moves as it should but there is no effect when moving the lever. Am i missing something?

Seen both Ford green & black which is correct?

Suggestions (before I break the bolts) on tips on how to separate the intake from the exhaust manifold. Thanks in advance.

I'm replacing the rubber in the mounts. I've checked but can't seem to find anything on it . Where does the rectangular rubber piece go?

Got my 29 Sport Coupe almost a year ago. Checked the head bolts then, all under spec some where even 35 lbs. Wanting to do a valve clearance check. But I first did a comp test. #1 & #4 are 74-75 lbs. #2 & #3 are at 52-60 lbs. This seems it might be a head gasket problem and if so what kind of...

Newbie questions. How can I determine if I have 2 or 7 tooth box? Also I have grease fitting & not plugs this is correct is it?