Search results

I have a 52 V8 so would the stud be on the top of the starter in order to use that button assembly that hueyhoolihan showed.

Hueyhoolihan, what do the two wires connect to on that device? Thanks

Snyders carries 6-volt beepers. There loud and I took a piece of sponge and taped it to the beeper for just right loudness that I wanted.

atch, the picture you sent is fine. You sure have a nice-looking vehicle.

Hi Pat, I just installed an alternator on my 52 with a Powermaster. I removed the 3 wires from the generator and separately taped the ends and then wire tied them to some other wires. I changed my pulley to the 3/8" also. Got the alternator installed and then I ran the wire from the back of...

Nice video, thanks for the info

Thanks Fred. Now to find one .

On a 52 Customline does anyone know if it takes the red sea bag or the glass bottle hook up for the windshield washer? Thank you....

I know according to the instructions the belt on the alternator has to be tight. Does the fan have to be really tight or can it have a little slack like the model A.

69a and Flathead Fever thanks for the ideas. This is a 239 v8 and the alternator looks like a generator.

I have a 52 Ford v8 and I'm putting in a new alternator with a new bracket and was wondering if there is a trick to getting the fan and the alternator tight, so the belts aren't loose. I am leaning over the radiator and trying to pull both things up but can't make any progress. I have a long...

I'm going over on Tuesday, and the first thing were going to check is that arm. That would be great since it shifted with no problem when he parked it in the garage.

No, the flywheel spins when started so would that mean it's not rusted. I am not very familiar with this part of the car.

I know we'll have to probably tear things apart but was hoping the OP would say what he did first. Car shifted great until parked for a couple months in the garage and now it doesn't shift at all without grinding. What a pain....

We have the same problem with the gears grinding. Can't start the car in gear as it will jump. We have to run it in neutral. We can see the throw-out bearing pushing in on the fingers running. This all happened as the car was put in the garage and not started for about two months. It sounds...

Turn your wipers on and then give it the gas and see if your wipers slow down or not.

Glenn if you're going to fix it yourself go to www.automotivetouchup.com They have kits for the color and step by step on what to do.

Plus, you would have $18,500.00 in it and nothing started on the holes.

It was a few days after I got the glass down inside the door without breaking it and yesterday, I got the glass frame attached to the window mechanism. BUT now when I roll it down the glass frame kind of binds on the mechanism. Do they make longer rollers or anything that I don't have to pull...

I took my cracked glass and frame to the glass shop, and they put a new piece of glass in the frame and sealed it for $79.00. I put the rollers in and also put two layers of blue painters' tape on both side of the glass to protect it. Took the vent window assembly completely out as suggested...