Search results

Now on eBay $15,600 or offer. Great running coupe, ready for touring, new tires see eBay ad for full description. Martin 860 301 9621 Thanks...

Selling my A, need a bigger car for now. 1931 Ford Model A coupe with rumble seat. Frame up restoration about 6 years ago and driven very few miles since. I purchased the car last October and have put about 600 miles on since then. Engine was rebuilt during the restoration and I installed a...

When I started driving my 31 A about two months ago the steering wheel had NO play, none, if you turned it a fraction of an inch the front wheels moved. Now I have about 3/4ths of an inch play, that is I can turn the steering wheel that far without the front wheels turning. The car is tucked...

I have what I think is a repop ammeter that is not working properly. It is at 3 amps plus when the car is off and goes to 18 when I am running the car then when I shut the car off it is at 10 til I tap it and goes back to about 3plus. Are these difficult to repair?

I removed the rear shock today and when I removed the cotter pin and large screw it came off fine but shouldn’t there be a spring under the screw holding the cup down? I don’t have one but not sure I need one.

Started the A up today and it cranked over slowly but it was about 30 degrees so not too surprised, it started. Drove it about 15 minutes and shut it off, attempted to start and it cranked very slooowwly until it would not crank, no start. I put a charger on it for about half hour then it spun...

I got the Lester 550X19s on the car and took it for a ride yesterday. The difference is unbelievable. I am sure its not because they are lesters but because they are new, the old ones were from 1971 and it felt like the steering column was made of rubber when going town straight roads it would...

I am looking for a small auto related business must be able to be moved to Connecticut. Parts supplier, small manufacturer, small parts refurbished (generator, starter or??) open to other auto related business as well, could be a part time or full time business or one that's been out of business...

I am looking for a small auto related business must be able to be moved to Connecticut. Parts supplier, small manufacturer, small parts refurbished (generator, starter or??) open to other auto related business as well, could be a part time or full time business or one that's been out of business...

I am looking for a small auto related business must be able to be moved to Connecticut. Parts supplier, small manufacturer, small parts refurbished (generator, starter or??) open to other auto related business as well, could be a part time or full time business or one that's been out of business...

I am replacing my tires on the 31 model A I was thinking of radial tires but they are almost $1,700.00 for a set of 5 with tubes, seems a bit much. I like the idea of radials but thats just too much for tires. I am thinking of getting Lester 550 bias ply, has anyone tried these and how are...

This is my first model A and I am just now starting to drive it more. The car runs great however when I am doing 40-50moh and come across even a mild hump in the road the car wants to (and does) dart to the left or right. I checked the wishbone and the ball looks new and the nuts are tight, no...

How difficult is installing a high speed gear in the rear of an A?? I guess the high speed is the 3.78 is that correct? Does it make a noticeable difference?? Thanks

I have the Signal Stat 900 installed but I am having a couple of problems. The indicator light on the Signal Stat do not light up, I think I need a better ground to the steering column to fix this? When I turn on either the left or right signal the front cowl lights, (standard single filament...

I am installing the Signal Stat 900 in the A. I have the wires for all the lights run and I am about to put the wire on the brake light switch as described in the directions. It seems odd but I guess the brake light switch now will get the power from the signal stat 900 is this correct and why...

I know this has been covered and I have read the other posts but I have a question that seems obvious but I would like to see what others have done. I have the Signal stat 900 and I think I basically understand how to wire it, but do I have to run two new wires all the way from the rear Left...

I am looking for a used Mitchell overdrive or other makes considered for a Model A. Thanks martin@abouttimect.com 860 301 9621

I need to install turn signals on the Model A, most people these days don’t seem to understand hand signals, at least not the ones I am giving. I have a brochure for Tickin Through Time, they make a hidden turn signal kit but was wondering how involved the wiring is. I just bought my A with a...

I was just checking my dist. and had it all the way retarded then pushed the lever to full advance. The bottom plate moved but the rotor position did not?? What is wrong??

I bought this a car about a month ago and just put a HC head on it, all seems good but I would like to time it. When I attempt to push the timing pin into place while slowly cranking by hand the pin does not go in. I even tried a smaller diameter pin, no luck. Whats the next best way to get TDC...