Search results

Hey guys! What's involved in removing the auto trans on a '55-'56 Fairlane. My car has a 351C & c4 auto. I don't see how the trans. will clear the rear frame crossmember. I am not talking about the rear trans. mount. That piece comes out fine. I am talking about the crossmember that the parking...

Hey guys! Does anyone know of someone who can rebuild a 1956 Fairlane steering box? Preferably in the northeast part of the country, but beggars can't be choosey. Thanks in advance! F F

Hey guy's! I recently rebuilt the front drum brakes on my '56 Fairlane, and am about ready to bleed them. I have noticed that the bleeder screw's are very near the spindle. I can get a wrench on the screw, but can't open it much because the clearance is so tight. Is this normal? Are there any...

Hello - I am changing my brake system back to original 4 wheel drum on my '56. I have a new single bowl master cylinder. What fitting do you all use on the single brake line coming out from the master? Is it NPT threaded? Help! Thanks in advance. - F F

Hello all! I'm looking for a 55-56 car steering box star washer. This is the one shaped like a star that goes under the sector shaft adj. lock nut. Original part # 3564. Thanks in advance!

Greetings! My '56 has a 351 Cleaveland that runs great. However, I need a new radiator. I have read where the 3 row aluminum unit is less restrictive than a 4 row unit. I have also read where the original copper radiator is the best way to go. What are you all using in your V8 cars? (I hope this...

Looking for a '55-'56 left side air vent cable, dash knob & bezel. Let me know what you have, & how much w/shipping to 14534 (New York State) Thanks! F F

Hey guy's! Is there any place that you know of that sells a rebuilt steering box for my '56 Fairlane? Also, when removing my box does the shaft come out w/it, or can it be disconnected? Thanks in advance! F F

Hey all! Anyone know what the backspace is on a '55--'56 Fairlane 15x5 factory wheel? Thanks in advance! F F

Hello All! I know that my car came w/15" wheels. Do you all think 14''wheels would look ok on a'56 Fairlane Club Sedan? Reason that I ask is because I have a nice set of "old school" 14" x 6" chrome reverse wheels that I think might look ok on my black '56. I know that Ford went to 14"s in '57...

Happy New year guy's & gal's! ! I am interested in electric power steering for my '56 Fairlane. I have read that it is easy to install. I have also read that it is a pain in the a$$. What is involved? What is the approximate cost? What is the best brand? Thanks in advance! F F

FOUND ONE - Thanks Carl! Looking for a 1954-1956 Ford car brake pedal & arm. Must be for an automatic transmission car. The T-Bird unit is different, I believe.

Hey guys! I have read before that the '54-'56 Ford passenger cars share the same spindle as the '55-'57 Tbird. It appears that they share the same part#. Is this true? Is there a right & left side? Is the steering arm the same, also? Is there a right & left side for them, too? Thanks in advance...

Looking for a pair of front spindles w/backing plates. Please reply with price shipped to 14534. Thanks!

A while back I purchased & installed a dual reservoir master cylinder w/proportioning valve kit for a 65-73 Mustang on my '56 Fairlane. This unit is for both power, or non-power brakes. The line from the master to the valve for the rear drum brakes is larger than the one from the master to the...

Hey guys! My '56 Club Sedan has a 351C in it. While idling it climbs to 200-210. However, when I point my laser temp gun at the t-stat houising it reads 170. The radiator is 20 degrees cooler at the bottom than top, so the coolant is circulating. The temp gauge is a new Autometer electric unit...

Hey guys! The Fairlane Club Sedan that I acquired last fall has had a Granada disc brake conversion by some previous owner. I recently got this car on the road and noticed that the turning radius seems shorter than that of other 50's Ford's that I have owned in the past. Is this because of the...

Nice set of rods. Free shipping to lower 48!

Original oil bath type. Good condition, very clean. Free shipping to lower 48!

1937 Ford bumper guards (2) straight, nice chrome. 80.00 free shipping to lower 48