Search results

New Old Replacement Stock: Cluster gear, 3-speed transmission, P/N A-7113, 15 tooth, 18 tooth, 24 tooth, 31 tooth. Not the finest cluster gear I've ever seen but certainly not the worst. Has some light staining and some casting imperfections on a few teeth. I would describe these imperfections...

Sold: Used Reverse Idler Gear w/bushing A-7141 Sold Very good, used reverse idler gear w/bushing, P/N A-7141, 18 tooth, no rust, pitting or cracking.See pictures provided. You will pay actual shipping charges from 55976 to your USA destination and I will combine shipping. Price: $20.00...

Sold: Transmission Parts : New Low and Reverse Gear A-7100 Sold New Old Replacement Stock: Low and reverse gear, P/N A-7100, 29 tooth, USA made, WT191-12 stamped. Excellent condition, see pictures provided. You will pay actual shipping charges from 55976 to your USA destination and I...

Sold: Transmission Parts: Used Pair of Shifting Forks A-7230 Sold Very good pair of used shifting forks, P/N A-7230, no rust, pitting or cracking. I can't feel any wear ridges with my finger nail. See pictures provided. You will pay actual shipping charges from 55976 to your USA...

I'm thinking about using a set of modern ignition points that have a felt pad for lubricating the rubbing block. The felt pad can be installed or it can be left out if desired. We ran these type of points back in the '70s with the felt pad installed and lubricated with a little 30W engine oil...

Within the last month or so I've noticed that opening and closing the passenger side door of my closed cab pickup just a few times causes the window to roll down about 3/4 of an inch. The window can be cranked up and down easily and this doesn't seem to ever happen while driving. Also, I have...

When I bought my Model A eighteen months ago I had no idea what cylinder head it had so I wasn't looking to buy one. But I remember them being readily available at Snyder's, Mike's, Bert's, Model A Medic, etc. So now that I know I have a stock head and I'm looking for a 5.5:1 head they've been...

There has been plenty of discussion on this forum and others about spark plugs, heat ranges, higher compression heads, hotter ignitions, what plug to use and what not to use. I would like to hear from people who have a stock Model A head, stock Model A ignition and otherwise stock Model A...

1931 Closed Cab Pickup on Hagerty Marketplace. Not mine and I have no affiliation with the seller, just passing on info. https://www.hagerty.com/marketplace/auction/1931-ford-model-a-(truck)/ded8e230-4bcf-4c89-a179-91f3bb8c5fa8

I've been working on cars and trucks for about 50 years but what happened yesterday is the kind of thing that keeps me up at night. About a week ago I was driving my Model A and the speedometer stopped working. I crawled underneath and disconnected the cable from the housing and, sure enough...

I'm no expert but this doesn't look like any 1931 Model A Deluxe pickup I've ever seen. Sure, it has a 1930 radiator shell (not unheard of), but a 1929 instrument panel? https://www.hagerty.com/marketplace/auction/1931-ford-model-a/0ca01dad-f78c-49d0-ba44-d7b8b862276b?scrollTo=comments

Found: Late 1931 Zenith Side Bowl Carburetor Upper Half Found: Late 1931 Zenith Side Bowl Carburetor upper half. Stripped is OK but it need not be. Side bowl is not needed. Good rebuild-able condition with no cracks, stripped threads or welded ears is a must. Willing to buy a side bowl upper...

It sold this morning for $65,250.00 https://www.hmauction.com/auctions/6471/lot/63655-1931-ford-model-a-400-dual-side-mounts-original-unrestored-in-very-go

My headlights and parking lights (incandescent bulbs) of my 1931 were working just fine. However, I removed the lenses to clean the inside and noticed that the headlight bulb filaments were not horizontal. In other words, the filaments in both headlight bulbs were "clocked" at about 10 and 4. So...

I'm curious, have searched the forum and the internet but didn't find an answer. But I would think Model A engine builders would know. Do Model A engine valves, either stock or modern valves with adjustable tappets, rotate as they're operating? If not, what prevents them from doing so?

My 1931 Closed Cab Pickup is missing the sliding lock on the inside of the driver's door. There's nothing there, no sliding knob, no escutcheon, not even a hole in the upholstered door panel. I haven't removed the door latch assembly from the door yet but I want to restore the sliding door lock...

I searched for an answer but didn't really find one in any of the prior discussions about window glass. First, I do know and understand the difference and benefits between tempered and laminated window glass including the price difference. My question is about laminated window glass longevity...

Looking for a pair of dent free 1930 or 1931 Model A or AA commercial black headlight buckets for my 1931 closed cab pickup. Update: No longer looking. Thanks to everyone that replied.

I realize the “How to”, “When to”, “Which head gasket”, “Which torque patterns”, "Sealant/no sealant" and “Hot or cold” of torquing a Model A cylinder head have been discussed at great length in these forums. I've even read a couple of posts that covered how much better the head clamping force...