Search results

Does anyone either own or have a clear picture of the 1932 March-Early April clutch, brake pedal mounting bracket? I would like to repair it. So, I'm seeking some pictures that would help with the reconstruction. The part that attached to the K member appears to have been cut off and I suspect...

Want to buy; a late 1932 torque tube and drive shaft. The late torque tube is scalloped at the rear flange

WTB 1932 Ford Rear Differential Housing / Case parts 18-4205, 18-4206

I’m rebuilding a Trico windshield “K” motor wiper for a 1932 Ford Cabriolet and from the Trico products catalog it appears that I might have two extra parts. Does anyone have experience with rebuilding them?

Anybody know of a shop that will straighten out a 1932 frame? Preferably in the Chicago area but I’m willing to consider shops out of state. I’ve tried to contact Ionia Speed Shop in Michigan using the information on the web, but I was unsuccessful. Perhaps someone has current contact...

I'm trying to figure out if I'm missing a part for the rumble hinge for a 1932 Ford Cabriolet. The bolt hole for the half of the hinge that attaches to the body is 5/8" - painted black. The corresponding hole on the hinge that attaches to the rumble lid is 1/2". The bolt itself has a shoulder...

WTB: 1932 V8 oil dipstick - left hand side

I'm seeking to solve the cause of a door gap on my '32 Cabriolet on the driver side. I'd like to know the distance from the leading edge of the lower hinge on the driver side door to the trailing edge of the door. The distance for the door in the picture is 30" (same door in all pictures) but...

For both sides of the top of the hood for a 1932 Ford passenger car to sit on the same plane and be properly aligned, does the channel for the center strip need to be squared (1st picture) or can it be rounded (2nd picture)?

Looking for a quote to transport an Engine and exhaust pipe from Kerryville Texas 78028 to Chicago IL 60618.

Which one is the correct upper steering housing cap (B-3589) for a 1932 Ford passenger car? The taller one (in red) is 2 3/8” in height and the shorter one is 1 9/16”. Otherwise, they are identical.

’32 Fuel / air line AKA saimesed / bundy tubing Does anyone besides Blue Oval Classics out of Cananda manufacture the fuel/ air line for a 1932 Ford car? https://www.blueovalclassics.ca/interior/gauges-608/gas-gauge-air-line-siamese-copper-coated-steel-original-ford-v8-3199576 I’ve...

Looking to purchase a front crossmember for a 1932.

Wanted - 1932 front axle spring.

Is this one of the thermostatically controlled shocks? It is 2 1/2" tall as measured from bottom of the base to the top of the stamped cover. The total height is 3 1/2" and the back of the base has a series of recesses radiating from the center. However, the patent numbers 1777129 & 1781127...

Seeking a damaged Fuel Guage tank Unit Assembly B9275. I only need the parts that are above the tank. I need parts: B-9293 Fuel Guage tank Unit Air Union and B-9291 Fuel Guage tank Unit Fuel Union –1st and 2nd pictures. 3rd and 4th pictures are of the unit that I'm attempting to repair.

Does anyone know if the corners of the rear springs, red primer, should be clipped, like the front spring? Also, should the 3rd and 4th leaves of the rear spring be the same length?

Does anyone repair rims? Looking for someone in the Chicago area but at this point any name/ suggestion is better than nothing. I’m afraid that if I take a hammer to the rim, it will only damage it and maybe push it out of round/true. As you can see the damage is on both sides of the rim.

Looking for a 1932 Ford frame with a readable VIN.

I’m trying to determine what versions of the ’32 Cabriolet rear window frames I have. The one closest to the rug came with the car and the outer trim is made of aluminum, while the inner ring is made of brass and held together by machine screws. 1st & 2nd pictures I purchased the second one...