Search results

Hi guy's, had my 36 Fordor out today to give it a run and it started fine and got through the town traffic fine as I drove out to a friends farm just out of town (10miles or so) Anyway on my way back in the first time I changed down the clutch pedal didn't come all the way up so I used the top...

Did a round trip of 120 miles saturday, stopped for petrol about 30 miles from home and when I slowed down near the bowser there was a scrapping noise from my back wheel on one side. I felt the brake drum and it was hot, when I took off again I could hear it, almost like a brake shoe...

When I got my 36 Ford it came with a crank handle, never worried about it as the car was converted to 12 volts and has been reliable. Anyway I've been thinking I'd like to know how to crank start it so I can say I know how to do it but I remember stories my old dad used to tell me about how he...

This was on my 36 when I brought it eight years ago, I have seen the leaping greyhound on 33 and 34 Fords and the guy I got my 36 from was adament they were for 36's as well. Anyway at all the events I've been to I haven't seen another one on a 36, was it an accessory or just the previous...

Ok just when things where humming along my 36 has developed a minor leak in the top radiator tank:mad::mad: I know that the right thing to do is pull it out but at the moment time is against me. Have found this on the Barsleaks site, as a temporary fix has anyone run this, if so any problems and...

Ok guys I've had the radiator in and out a few times over the years in my 36 and the worse part is fitting the bottom radiator hoses. Well I've redone the top hoses and thought the bottom were fine but...........there were some telltale drips of coolant coming from one hose this morning so I...

Have got a set of new Edelbrock heads for the 39 Mercury engine in my 36, also the longer studs and new head nuts. Should I have any concerns about changing the studs over, my engine was rebuilt (previous owner) and I assume these are the original studs. Just worried that I might snap off the...

Anyone tried the Edelbrock Slingshot manifold yet, my past life (before flatties) I ran a red hot tunnelrammed windsor in a hiboy and it did like to have the revs up around town due to the height of the plenum, just wondering if the same characteristic is shared with the slingshot manifold. I...