Search results

Is there anything that holds the brake pedal push rod in the master cyl. I am replacing the master cylinder. Pulled like crazy cant get it to come out. I know some new ones have a clip that holds rod in not sure about this one. don't see anything on parts brake down. Thanks Doug

Anyone here ever use a dustless blasting vendor or just the process? My 39 is looking bad along the drip rails and since this process is less harmful to the sheetmetal (so they say) I would like to get the area cleaned down to bare to see what I am dealing with. How does this compare to...

I have a good line on a 48 F1 rearend with brakes. Am I correct in thinking the backing plate and all will bolt up to my 39 rear? Thanks

I thought I posted this before, guess I forgot to hit the submit button. Anyway can someone with a 35 or 36 take and send me some close up pictures of the side hood trim to show the profile and also measure the width. I measured my 39 and it is 1/4 wide. I have an idea on making grill trim...

I am looking for the grill trim and hood side trim for my 39 standard. If you have it or know where I Can find it please PM me. Thanks,

(39 standard) I am going to remove my water temp gage from instrument cluster to get repaired (only one not working) I will put in a Aftermarket one while wait for the other to come back. Question is how much water will I lose from the system? Will it be all that is in head, all in hose and head...

This is a small thing but does any one know how to R&R one of these things. Photo's attached. My spring is broken and I don't see any way of removing the pin that holds it in.

Guestimate, how long will your car run with lights on with battery if the generator stopped charging? Full charge on good 6v battery. Doug

Man I hate electrical problems. (39 two door standard sedan 6volt) I have tail running lights on right and left, problem is when I step on brake peddle my right tail goes out and brake light does not come on. Left side is all good. This could get long so hang in there. So I looked up under car...

Got one but don't know which ones go where. Trying to take some of the shake and rattle out of it. Also got cowl laceing kit. Anyone have a layout or picture of which ones go where. Thanks

I this to much shock angle for them to do any good? Not sure what previous owner based this angle on. I assume the 39 came with leaver shocks stock.This 39 sedan is just not riding very good. Thanks Doug

Hi all. Well I did it. I got me a 1939 Ford Standard. I have in my past 64 years owned two 40's one stock and one street rod. This 39 is a little in between so to speak. Stock engine with a T5 trans, open driveline and stock banjo rear. also has Fenton headers and new duel exhaust. I look...

Looking into getting a 1939 Standard Sedan which has the roll out windshield. Can these be changed over to say a 40 windshield held in with the rubber gasket. Thanks, Doug