Search results

Still looking for one of those hubcap tab bending tools that used to be available for installing the hubcaps. I think it was a T1130 part number.

All 8 of the door hinges on my 31' s/w town sedan have slotted heads on the screws showing on the body side of the hinge and fasteners showing flush with the hinge on the door side. Did they come from the factory this way? This makes it necessary to remove the door trim to replace a hinge.

I am looking for an original outside door handle for a 31' SW town sedan that has the key lock in it with a key that works.

I took the out side door handle with the lock in it to a local locksmith and he said that the insides were corroded enough that he could not get it to turn or be able to put a key in enough to turn it. The handle looks great so I can still use it but I would like to be able to lock the car. It's...

What is the correct size die to use as a thread chaser for the wheel lugs that the lug nuts screw in to? 31 SW Town Sedan.

When reassembling a '31 side-bowl Zenith carb what is the best lubricant to use on the throttle shaft ends?

How to get a hub cap to not be loose when installing on a '31.

Used for the tabs on the hub caps. They seem to have been made by A&L but no longer made.

I am going to replace the gas shutoff valve on my 31 s/w town sedan with indented firewall. What is the recommended sealant to use on the threads where it screws into the outlet of the gas tank?

Does anyone have a setup at home to be able to add gas to the tank from a gas can without pouring from the gas can itself? Hand crank or electric pump. If so what worked well and what didn't? Hard to not drip when pouring from the gas can itself.

Looking for opinions on using a Gano Filter,and where can they be purchased.

I need to replace the water outlet petcock. What is the correct way to seal the threads when installing the new one. I am going to use the replacement that has the hex head on it to tighten.

I have a 31 S/W Town Sedan. It's been converted to 12 volts. Is there a 12 volt battery the right size for the original battery box so that the original hold downs can still be used? Anyone have any photos showing how you secured your battery in the original box? A group 25 is not wide enough...

https://limaohio.craigslist.org/pts/d/alger-ford-model-body/7123914797.html Not mine, but saw this on craigslist.

How long after having my Model A repainted should I wait before using a car cover on it? Any opinions on the best type of cover to use?

For those of you that live in Ohio, what do you do for license plates if you want to do more than just parades or shows? It seems that is all you're supposed to use the car for if you want to use original year of manufacture plates, or even the Ohio Historical Plates.

Were all 1931 S/W 4 doors considered Town Sedans. If so, does this mean that they should all have wood grained interior trim pieces?

Am thinking of adding the temp and oil pressure gauges using the bracket that mounts under the instrument panel. How do you run the lines inside the car so that they don't show very much? Where do they go through the firewall? I have a '31 S/W Town Sedan.

Looking for a matching pair of 1931 Ohio passenger car plates in good original condition..

Is it possible to check the VIN number on a 31 4-door without taking the body clear off? If so, could someone explain how to do it. I need to do a VIN verification to transfer a Florida title to an Ohio title.