Search results

I've been looking for just a Dust Cover. Nothing against waterproof, rain proof, breathable covers but all I need is to cover Duke in the garage. Any suggestion would be appreciated.

For the 1930 Restro what is the "correct" bumper. I thought it was stainless but so sure

Now its time to order an interior for our restroation, I have a deposit with Lebaron Bonney (who I too call Labron Bonney). But, we also want to insulate; so how do we insulate the floor? On top of the floor boards then lay carpet or insulate on the bottom. If we insulate on top of the floor...

Left rear fender to complete a restoration -1930 Model A Sedan. Thanks, Skibbl

Our '30 Briggs Sdn came with a seal-beam conversion, want to replace. See two and one bulb sets but what to buy?

Is all replacement glass the same spec or are there differences. That's a dumb question but I don't know.

Any advice/pics of where to place the '30 Speedo Cable Clips (Round Speedo) Re Briggs TS.

We are getting close to putting in a new interior. Suggestions please for a Vendor that sells seat springs.

This is a fun event this Saturday in Ft Myers, Florida. And it's an all Ford show with 170 classic and antique cars. From 10 am to 2 pm with sunny skies and a dozen or so Model A's. In the past we have driven across the state in our A's but this year we're trailering. The location is unique...

As our restoration inches forward we would appreciate advice on what to use to mount the Dome Light. Bracket or wood piece? Thanks in advance for your help.

We are installing door hardware in our '30 4 dr restoration. But the latch on the passenger side front door is missing. Suggestions where to find one would be appreciated.

Where can buy a Dome light for our restoration. Thanks

What's the best replacement wiring brand or vendor for it. It's almost time to put in new wiring in our restro car.

Thank you to Ashley and a great team for your help in Raleigh-Cary.

Some members of our Cub (not I) want to incorporate as a non profit entity. Currently, we are a small dual MARC/MAFCA Model A Ford Club with no history or current experiences that suggest this move. We are just a social Model A group. It's beyond my pay grade to even guess if this is sane or...

It seems that every nut, bolt or item on the Model A was put in place for a reasson by Ford Engineering. So to that end what are these holes for (see photos pls).

On our 1030 restrotration car there are "Nose" Aprons installed in front of the splash shields just like Henry designed. My question is does this piece get any fender welting?

Does the Nose Section of the 1930 Splash Apron get fender welting? I don't think so but we are that stage in the restoration process.

Traveling to Sparta, TN for the 4th, any Ford Barners in town?

The photo shows the top of two steel bolts that go thru the chassis wood to the frame and a rough looking "kick panel retaining clip" (which will be replaced) but were the two holes at the top of the photo used for.