Search results

  1. A

    1937 Ford pickup

    Original, except hydraulic brakes, 12v modern seat and interior. Re-built from ground up. Runs great. All gauges work. Drives like new. Contact Alan at 812-719-2254 or email aatable@hotmail.com 812 719 2253 reduced $12.000
  2. A

    Side glass in doors 37 trk

    Getting ready to install side window glass in my 37 pickup. I do not have old glass as a pattern. Anyone here one Barn have drawing showing the size and shape? Also any help on how to install would be very helpful. I have replaced glass in the Model A' s but not the newer trucks. Thanks...
  3. A

    Model A swap meet

    Anyone know what date the Model A swap meet this year in Lousville Ky. This is good little show at the Armory out by the Fair Grounds. Lot of good food,parts and friendly people. I know it is in January,but not the date. Alan
  4. A

    How to remove windshield frame

    I need some help and advice. I have a 1937 ford pick up and i want to remove the entire wndshield unit. This truck has been settig for about 60 years in a barn but is rough, it set out side before it was parked in the barn. By the looks it had a rough life on the farm I have most of the body...
  5. A

    new rebuilt flathead is tight

    Well I rebuilt my flathead myself, it's ready to start I have it mounted on a steel 4 wheel cart. I can roll it outside to make trial starts without burning down the shed. My problem is the motor is tight. Anybody ever had this issue? Do you think I could remove some spark plugs and make it...
  6. A

    Tire size

    I have a 37 ford truck that I'm getting ready to install tires to the orginal rims. What size can or should use. Thanks in advance Al
  7. A

    what voltage needed for coil

    I'm almost ready to test fire my 39 merc. engine. My question is what voltage is needed on the coil. Seems like I rememmber reading that less than 6 volts is nneded on the coil. I plan having 12 volts system on the 37 truck that this motor is going into, I plan on using a 6 volt resistor...
  8. A

    Dissamble distributor

    Well I'm getting ready to rebuild the distributor on my 39 merc. engine. It's one of the units that is refered to as divers helmet style. My Question is how do these units come apart? I want to be careful and not damage anything. Thanks in advance. Alan
  9. A

    Serial number on engine

    Where can I locate serial number on 39 Merc. Engine? Will this number be the same as number on the frame? Thanks Alan
  10. A

    Auminum or steel intake

    Which is better to use, are there benfits using a aluminum intake. How do you guys clean polish the aluminum? Alan
  11. A

    Flywheel center bearing

    My flywheel has a brass or maybe bronze bushing in the center where the transmission shaf slides into. I thought this was a ball bearing type unit. What should I do? Order a ball bearing or is it ok to use the bronze bush. thanks Alan
Back
Top