Search results

Presently in the process of working on a full frame off restoration of a 1928 Briggs Body 60A Model A. All new wood, including new wood sub rails. During this restoration, my intention is to install a restored Keri Keen luggage trunk which I have in my possession. This is the trunk design...

Wanted: Pair of 42 - 48 external hub brake drums 12". Please send pics and internal measurements along with price.

Will the electronics of the "Logo Signal Light" system, with the existing four signal bumper lights, support the addition of a "Brakelighter" in the rear window, to use the signal light feature also, of the "Brakelighter"? I have to remain pro-active with todays drivers

Looking for the name of someone who still uses the wheel method for producing the "cut glass" designs for the Wind Deflectors. I would like to get two different sets made. I had the name for a lady that was producing this art, but lost all contact information over the last few years.

What is the best method of repairing the worn king pin bores of the front axles ? Is there a procedure available for a proven method ? A few members of our club have expressed a desire to have their axles checked for straightness, along with resizing and re-calibration of spring perch bore to...

These questions on starter Bendix's have been around the world and through the patch, more times than I can count. Which are stronger of the 3/8 size Bendix Bolts, an original NORS set, or the new replacement set removed from a new manufactured Bendix ?

Sometime back, possibly 3 to 4yrs, a club member who lives 50 miles north of me, gave me a package that was supposed to contain a set of wind wing brackets that were supposedly to fit a 1930 Cabriolet. This package I was requested to pass on to another member of our club at the next meeting...

Would anyone happen to have a set of original "Wind Wing Brackets" for a 1930 Cabriolet. Pictures would be appreciated.

Would someone mind directing me towards a fairly comprehensive written article with pictures on the corrective actions that are required to obtain a well fitting hood on the Model A. I know I read one several years back, but the years have erased that part of my memory.

I did a search back using the "search" link to determine if anything new had been posted regarding front spindles. By chance has anyone yet pursued the possibility of a company manufacturing new front spindles for the Model A ??? A great looking machined product is available for the "Hot Rod"...

One of our club members, purchased a really nice 29 Tudor with a "B" engine, other than it came with a Model A head and water pump. After driving the car a couple of times, he noticed it overheating consistently after short runs. After the usual engine checks and inspections, such as...

Early 1927/28 Model A Transmission Housing C/W reverse gear idler shaft & cluster gear shims. Shipping cost to be determined at time of sale. Please send email or pm for picture

Original Ford Draft Deflector Set (Windwings) Part #A-18277 to fit sedans 160A - 160B - 160C. Originally made by Dole Valve Co. Chicago If you have just the brackets that I require, that would be great !!:) Send me a PM for pictures

Fox spare tire lock required. Complete with stud lug and matching keys. I have the band that clamps around the tire, but just need the lock assembly. I also saw the one listed on Ebay that will be sold later today, but much too pricey for my pockets. Someone will snipe it at the last milli...

What would be the best proceedure to use to verify whether the front backing plate is bent, or could it be possible for a front spindle to be bent. If it is possible the spindle is bent, what test proceedure could a guy use ? I have already tried the drum with the bearings on the spindle and...

Need help from someone on the Fordbarn that could hook me up with a supplier that is willing to ship me a quantity of Marsden Lock Nuts of grade 8 quality, in 3/8" NF and 1/2" NF. We have not had any luck locating a fastener supplier here in Alberta Canada that carries this particular make of...

When you decide to overhaul your steering box, and intend on installing one of the "Steering Housing End Plates" A-3568-T, try the fit of your "Light Switch Bail" on the two ears of the plate to ensure proper fit and movement. This along with the recomendation of others to re-solder the tube...

My wife and I are planing a short trip down through Montana and Idaho in the near future, and was wondering if there were any swap meets or such going on, during this month or next ??

Thought there might be a few Fordbarners interested in looking at a couple of pictures of different wrenches used for tightening, or holding the square head on the main bearing cap bolts. The first offset wrench shown in the attached pictures, has the Ford script along with the tool number...

I have just finished reading the previous threads and posts, regarding frame straightening, but would like to know what the tolerance should be, measured from corner to corner, and is it acceptable for a frame to be 1/8" high, on each side at the center crossmember.