Search results

1935 slant sedan mostly original has hyd brakes new wheel cyls gas tank original newly powder coated wires with new coker white walls. Interior redone some time ago but still in nice condition. bob 9314461114

I've got a 65 mustang rearend I want to put in my 35 along with posies dropped frontend with lincoln style brakes. I'm keeping my wire wheels and flathead along with trans. Are there any major problems going from the trans to the 65 mustang rearend as far as the drive shaft goes? Bob

Need the cross shaft for 35 brakes. Would like to have one to hook up e brake. Bob

Should tires be balanced off the center hole on 35 wire wheels or off the lug nut holes. Bob

Is it possible to remove the oil pan on my 35 with the motor in the car? Just wondering if someone has done this and have tips before I start. Bob

Fella in town gave me this little tool. Anyone know what brand it is and where I can find instructions? Bob

Question guys I hear 59ab and 8ba for flatheads. What is the engine designation for 35 and 36 flatheads. Is it the car model or some other number. Thanks Bob

Drivers side window on my tudor doesn't come up all the way in the back. It has about 1/2 to 3/4 inch slop in it. I can lift it up in place but won't roll up there. Adjusted all over but doesn't help. Need to get it out and see whats wrong. Need tips on getting it out. Thanks Bob

Okay guys I finally got a passenger side taillight stand for my 35. Can anyone post some pics or give me some measurements as to where I need to drill holes to mount it. Don't want to mess this up. Thanks Bob

Is it possible to drop the pan on my 35 and change the main seals with the engine in the car. Car runs great but leaks bad. Thanks Bob

Looking for ideas on the best place to buy 600-16 tires for my 35. Thanks Bob

Another question. So the fella I bought this car from put a carter elec fuel pump on it . Rotary vane 6-8 psi with no regulator. Causing some problems like over riding needle and putting gas in the crankcase. Took the pump off tonight not sure what I'm going to do yet maybe small inline or...

Can't find a drain on the bottom of my radiator. Did ford not put one on the bottom of the radiators? Do you have to pull a block plug or something to drain down the radiator? Thanks Bob

Okay after having the car about 3 months now and fixing a bunch of odds and ends got around to the motor. No aluminum heads thought 35 was supposed to have aluminum heads. Wire wheeled the paint off of heads and found numbers 68-6050b and 68-6049b on top left corner of block is LB. So I guess I...

How do you change accelerator spring on 35 ford linkage? Do you slide spring on or does linkage come apart. Would like to know before starting job. Thanks Bob

Need amp gauge for 35 ford tudor slantback Bob

Need passenger side tail light stand for 35 tudor slant back sedan. Thanks Bob

Does anyone know where I can get a tail light stand for the passenger side of my 35 sedan. Drake doesn't have one and they said 36 won't work because contour of 35 and 36 fenders are different. The guy also said 35 never came with 2 tail lights. I was under impression that standard had 1 and...

Should have put this in my other post I guess. On the 35 amp gauge does the wire go straight thru the gauge or does it have a loop in it. Want to hook it up and see if it works. Also on the dome light does the ring just snap off to change bulb. Tried pulling on it but it seems quite tight...

Is there a difference between 6 volt and 12 volt amp gauges? They put a cheap after market amp gauge on my 35 and I am trying figure out if its working right. When I turn on ignition it goes to discharge even further with lights and heater motor. Then when I start the car it doesn't come up...