Search results

I was wondering who sells the steel sleeves that fit into the leaf spring eyes? The sleeves are 7/8" OD x 3/4" ID with a wall thickness of 1/16" and an overall length of 1 3/4" and 2 1/4". Thank you! Walt

I need to shorten a set of '33-'34 brake rods to fit my '32. Do I measure from the center of the round eyelet to the opposite end of the rod or do I measure the overall length of the rod? I know what the lengths need to be, but I do not have any old rods to use for reference. Thanks!

I just finished overhauling the steering box on my '32 Ford. When I Bench tested the box I went to install the pitman arm and noticed that it will only fit the shaft either at the 4 or 7 o'clock position. I assumed that if the steering shaft is at "high center" (half way between the 3 1/4 lock...

I would like to upgrade my '32 Steering Sector Housing with the 1936 needle bearings and oil seal. Who offers this service? Thank you!

I need to repair the damaged threads in the "oil fill" hole on a '32 Steering Gear Box (car) can anyone tell me what the correct size tap/thread chaser I will need? Thank you in advance for your info. Walt

I am going to overhaul/restore the steering column lock mechanism on my '32 Ford. Has there ever been any printed material/information on this subject? I would appreciate any information, ideas, experiences, etc. Thank you in advance

Wanted for a '32 Ford: Steering Sector Shaft Housing. Must have Part #B-3583-A stamped on the part.

Looking for 3 NOS or Mint used draglink balls/studs for a 1932-'34 Ford car. Ford part #B-3311

Looking for rear leaf spring clamps for a 1932 Ford for a 9 leaf spring. I also need the spring "center" bolt. Parts must be original Ford in good condition.

I am in need of an original Front Leaf Spring for a 1932-33 Ford. Must be 12 leaf with tapered corners. Please private message me if you can help. Thanks, Walt

I'm looking for a pair of 1932 Frame Rails or will consider a complete frame. Must be original Ford with little to no modifications. (Will be used for restoration purposes) Please send me a private message with details. Thanks! Walt

Looking for a 1932 5 Window Coupe/Sedan rust free lower windshield channel. Please e-mail me if you have one for sale. Thanks, Walt waltg69@msn.com

Looking for a '32 5 Window Coupe Windshield Frame. Must be stock height, original Ford, and no rust issues. Glass not necessary. Please contact: Walt Geistler (248) 841-1427 or waltg69@msn.com

Will a 1933/34 pick-up truck commercial steering column assembly fit/work in a 1932 Coupe? What is different besides the steering ratio? Thank you in advance for your help. Walt

I am going to assemble a frame for my '32 Ford 5 Window Coupe using a pair of ASC reproduction frame rails and all 3 stock '32 Ford crossmembers. The entire frame will be riveted together like original. I know that this combination of parts has been used many times, but is their any precautions...

Looking for an issue of American Rodder Magazine from the late 1980's to the early 1990's. Not sure of exact year or month. This issue has an article covering the restoration of a wrecked 1932 Ford Frame. The article was written by Mike Bishop. The restoration work was performed by Vern Tarder...

I am looking for a stock, original 1932 Ford Frame or Frame Rails. There must be no modifications. Contact: Walt at waltg69@msn.com or (248) 841-1427