Search results

I am having some difficulty with my 1946 F1 speedometer I have replaced the speedometer cable but the speedometer keeps making a screeching sound. I was wondering is it may be due to the cable not making proper contact inside the unit. Can you replace just the driving mechanism in the...

Original heater on my 1946 F1, because my 6v heater motor had some issues with the wiring, and due to the fact that the truck is now 12v I decided to change the 6v motor to a 12v motor. I realize that there are some modifications to accomplish in order to switch the motors. I cut the bolt...

I am in the process of installing an original heater in my 46 F1. The electrical system has been converted to 12V. I am not sure if I would be better off stepping down the power to 6V or installing a 12V motor instead. I also am looking for some wiring instructions. If someone can help it would...

I am looking for a heater switch assembly for my 46 F1. My problem is that I don't know what is required. I believe there is a small panel that fits under the dash with two knobs on it. One being the switch that controls the fan speed the other may be a cable but not sure what the cable mounts...

I am looking for the heater switch assembly for my 1946 Ford F1 Not sure what it looks like. I understand that there is a switch that controls the fan speed and I believe a cable to control the defrost

Painting floor boards I would like to paint the floor boards on my 46 F1. black I would like to know what paint I should use? Would truck box liner like Linex or similar work ?

I am looking for a heater for my 1946 ford F1

I managed to remove my driver side door window from my 46 Ford pickup. I had a new piece of glass cut. Now I need to reinstall the window in the door. Can someone instruct me on how to reinstall the window. Thank you for your help...

Does anyone know how to remove the door window

I am looking for information for my 1946 F1 pickup. I am wondering if there ever was a PCV valve installed in 1946.

I am looking for an instrument cluster decal set for my 1946 Ford 1/2 ton pickup

I am looking for a decal set for my 1946 Ford F1 1/2 ton pickup instrument cluster.

I am looking for an original fuel sending unit. I need a unit with the little black resistor in place. This resistor can be found inside the sending unit cap. Thanks for your help.

I had posted a want add and have located what I was looking for. How do I delete the add so that I don't waist other members time?

I am looking for a replacement fuel gauge for my 1946 Ford F1 pickup.

I have been searching this forum for information on fuel the gauge. I would appreciate some help in finding a solution to my fuel gauge problem. I have a 1946 F1 with a V8- FH and last fall I had the fuel tank re built. This spring I noticed that my fuel gauge has become unreliable reading ¼ to...

I am looking for an instrument cluster with a GPS driven speedometer for my 1946 Ford pickup. I am having some difficulty locating the proper speedometer driven gear and I am having trouble with the speedometer itself. If someone has some information on a GPS driven cluster system that looks...

I am looking for a speedometer driven gear for my 1946 pickup, with 21 teeth for three speed open drive.

Can someone give me the correct length of the speedometer cable on my 1946 Ford 1/2 ton pickup. Thank you,:)

My 46 did not have bottom weather stripping. I have the new seals however, not sure how it goes on. Does someone have a picture of how the strip is glued on?:)