Search results

Does anyone know what is going on with Trautwein ? We have been unable to contact them for over a month.

Looking for a pair of center outlet headers for a Y-Block install on a '47 Convertible. Thanks, Paul 937-325-2408

Looking for a pair of the center outlet ram style headers for a Y-Block motor. Thanks, Paul 937-325-2408

What are the fit problems on these ? I have sold at least 100 of these. Now I have a customer that says the flange that the hood closes against is too high on the passenger side. Says the hood sticks up when the hood is against the flange. What have you guys ran into ? Thanks, Paul Midwest...

Hi Barners. After weeks of hauling and sorting, we have most of the parts that were auctioned last month sorted out. There are alot of parts we haven't seen in a long time. Call us with your needs. 800-543-5035. I know you guys are gonna ask what happened to all those flatheads. They didn't...

I have a brand new NOS roof skin for '62-'63 Falcon. Call 937-543-8299 or 937-969-5088 evenings. I can pack and ship if neccessary. Thanks, Paul

I have a NOS Falcon hood. C2 prefix on part number. I believe this is for the '62-63 Falcon/Ranchero. Factory red oxide primer with part number painted on back side. Call me at 937-543-8299 or 937-969-5088 evenings. I can pack and ship if neccessary. Thanks, Paul

We bought the building full of old Ford parts in Memphis. It will take us some time to figure out what all we have. If anyone has any special needs we can try to help. We will be at that location several weekends over the next year. If anyone wants to come thru, call the store and we can make...

Looking for a set of '36 .020 rod bearings. These are the flanged type. I have bought some of these from a "Barner" before but I can't remember who it was. Thanks, Paul 800-543-5035

I know there is someone on here that provides dependable 8ba distributors. Who is it ? I'm in need of one. Have a brand new 8ba motor. only mods are merc crank and cam. runs funny when holding a steady speed above about 50mph and cackles out the exaust when you let off the gas. The only thing...

Hi Guys, We had a 26' trailer stolen Monday night. It was loaded with inventory. Mainly bumpers, beds, and running boards. The beds are broken down into pieces for late '50-'56 pickups. Bedsides, fronts, tailgates, and wood floors are all separate. Please be on the lookout for this stuff coming...

I just put a new motor in my '50 Convertible. Merc crank and max 1 cam are the only thing not stock. The only thing we have re used from the old motor are the carb and distributor. When holding a steady speed, the engine has a slight miss that happens every 5 seconds or so. It goes away if you...

I am looking for a ring and pinion for my '50 Convertible. Not sure what the actual Ford ratios are but around a 3.23 would be great. Please email to pbills@midwestearlyford.com I haven't completely figured out the fordbarn message system. Thanks, Paul

I have replacement door hinge pins that are slightly oversize. They measure .245. What drill size do I use on my hinges ? I definately don't want to drill too big. Thanks, Paul

Has anyone had valve clearance issues on the isky max-1 grind for the 49-53 ? Only mods are 4" crank and the isky cam. stock heads. Had a reputable person build my motor. It sounds like a diesel. Has a nasty growl and valve clatter. Any advice would be appreciated.

Is the '39 banjo steering wheel a bolt on for a '38 standard column ? Does the '38 light switch rod work with this wheel ? Thanks, Paul

I am looking for the hangers on the rear of the rear springs that rivet to the frame. 1953-1956 F-100 should all be the same. Ford part number TAAA-5775. Hopefully one of you guys have changed to a 4 link and no longer need the brackets. Thanks, Paul paulbills1020@yahoo.com

I have a good pair of ready to go Aussie heads. New valves, springs, hardware. They were on a motor for a short time. I had them taken apart and cleaned and checked and have not installed them. My project is on hold for now. please email to pbills@midwestearlyford.com or call 937-543-8299. I...

Hi Guys, I am in need of a good used camshaft for a 1950 Flathead 6. Thanks, Paul

Looking for a pair of Aussie heads for my 351C. These are the closed chamber 2bbl heads. paulbills1020@yahoo.com or 937-543-8299 Thanks !