Search results

Hey guys I am having my 36 water pumps re built by skip. He told me that the left side water temp port is 5/8-18 , the Stewart Warner gauge I got which is mechanical says that the thread on their temp is 1/2 inch. Is there an adapter to put this temperature sensor in? What have others done ...

Hi guys I have a 36 roadster , original 21 stud with water pumps on the heads. I have power master alternator and e fire distributor 12v and a sharp dual intake manifold . The issue is the drivers side original pump died and the pulley came loose. I got a pair of Dennis carpenter pumps. Put them...

I have a set of perfect gear drive polished aluminum air cleaners with real copper mesh and modern paper element. These fit stromberg and Holley carbs with a 2 5/8 “ neck and are 4 5/8 “ around . They sit in place with a set screw and have zero damage nicks or scrapes. Would look amazing on a...

Hi guys . How do you remove the license plate holder from the rear taillight on a 36 roadster? It’s between the light and the housing itself. Any help would be appreciated. Thanks

Items for sale . Distributor is working fine with new terminal end plates and skip haney coil. Stromberg 97 works fine took it off my 36. Generator has holes at the front for fan mounting. Works fine. All items are negotiable. Hub caps are 41 smoothie, 6 V fuel pump never used. 41 battery hold...

Hi I have a 36 ford roadster , 21 stud flathead.. I want to put thermostats in but each time the NOS ones come up on eBay.. I get out bid. I tried to email and call Bob shewman and no response. So what are you guys who own 36s with 21stud engines using? Whats the alternative that works? Thanks...

Hi guys trying to track down some thermostats for my 36 ford , I contacted Bob Shewman and haven’t heard back for about 3 months. Anyone know if he is still doing these stats or someone else is? Thanks for any info

Hi guys . Asking if anyone knows of a bezel that exists or fits the dash choke hole on my 36. I can’t seem to find a bezel for that year , so any alternative would be great .

A set of new unused points ignition lacquered cloth covered wires from noble speed for points ignition flathead . The spark plug ends are straight and already fitted. These are never ran and are a really nice set for your engine. $60 plus shipping

37/41 distributor in perfect working order comes with new terminal end plates , new condenser and rubber spark plug end covers. It has a new rebuilt skip Haney coil with new coil screws. This unit came off my 36 and runs perfectly fine. Perfect for your build

Hi guys I have a 36 roadster and I am swapping out the stock manifold for an aluminum one. What size are the stock bolts.. I cannot remember 🙄.. also I have 8 holes that require longer bolts than stock. Does anyone have a good bolt site that has grade 5 etc that I could take a look at? Here is a...

Hi guys I am looking for a 1936 choke rod replacement (not bent) for my high rise fuel set up on my 36 roadster. I have searched and called every where and nobody has them . They were discontinued in 2022. The question is does anybody know of anyone else making them? Or should I just make my...

Hi guys I have a 36 roadster and my 21 stud has BB stamped on the block on the passenger side. Does this indicate a truck engine?

1936 Grill guard . Good chrome , not show but great driver quality. Has all the bolt on attachments. $60 plus shipping. Thanks

What’s a good spark plug for a 36 Hi guys I recently acquired a 36 roadster deluxe, and wanted to know what are the best plugs for a 21 stud 36 motor? I know champion have had some criticisms so what are you guys using and have found works well? Thanks

Hi guys looking to install a beehive oil filter on the firewall , my oil line runs from the filter to behind and underneath of the distributor.. is this a modification by the previous owner and where would it go into in that location. Also what connections are these and what type of hose is...

Hi guys . I want to convert my stock oil housing on my 41 coupe to a beehive firewall mounted set up. Anything I should know before the swap? Are the fittings on the lines usable on the beehive filter? Any info on this would be much appreciated. Thanks

Hi guys. I have a 41 ford and I am about to put Navarro heads on. Problem is the fins on the head won’t allow for the oil filter bracket to be bolted onto the heads. H&H said I could use three longer head studs and a spacer to elevate the bracket above the fins. Has anyone had this issue and if...

Hey guys I am about to put a set of Navarro aluminum heads on my 41 ford(stock cam) I run NGK 6BL plugs at the moment , does anyone know if that plug has the correct reach? If not what are you guys using?

Hey guys does anyone have info on any of these brands that produce these ford script batteries? There is two ,similar price . Any info on performance, longevity or fit. Thanks