Search results

28-29 Ford Roadster project. Does not run or drive. mHas many nerw parts patch panels etc. original henry body in fair shape. Has all patch panels needed plust a bunch of parts. No Trades please no help to sell etc cash and carry. More pics to serious inquires Thanks for looking at my ad...

Hello Barners I want to install a bearing race at the top of my steering column on my 40 ford pickup truck instead of the stock bushings. I have stock steering and the bearing will ease my turning of the wheel. I did this previously on my 34 ford SD. I will need the ID and the OD of the stock...

Hey Barners would like to get two (2) 94s that match and are good for rebuild etc. Will pay $100 includes shipping to 94608 Ca Thanks for looking Stay safe email tuckgt@hotmail.com

need 40-41 pick-up steering column in good condition. Do not need anything but the column have drop ect , actually have two with locks. Column I have is in bad shape. trying get back on the road. Thanks Barners

Wanted 1940 Ford pick up working with key column drop. Be great if it had the electrical on the back. Thanks for looking my zip is 94608 Ca. Gary

Looking for a new or good used front emergency brake cable with clevis at both ends for 1940=41 pick up Thanks Gary 510-672-0113

found on the HAMB

Will a 40 Merc Hood fit on a 41 ford pick up ? Thanks ahead of time. Have a chance to do the swap and need some advice/experienced info

I have a 40 pick up that someone wired with an after-market headlight switch. It worked good, now after I was near the dash wiring putting in a fan switch only the high beams come on with the dimmer switch. Any ideas, Thanks in advance.

looking to buy 40 ford radio grille , driver quality Thanks. Gary can email tuckgt@hotmail.com

I need to replace the passenger female dovetail door latch on my 40 pick up. I'm use to replacing the whole unit, like on a 32. do you remove the worn piece through the hole in the door frame side or go behind the door frame and remove from there ? Thanks for any info or tricks to make it go...

I have decided to keep Ford in Ford, so I'm going with a 289 w/C-4 actually 5 speed AOD into the stock 40 Ford pick-up frame. I know I have to drop the wishbone and remove the stock trans mount and tunnel. Anyone who has done this or is there a thread that has been posted. Thanks in advance.

Advice please, on how best to remove Henry's rivets on a 40 Ford pick up cross-member at the frame, trans X-member. Grinding them off would/could damage the frame, drill them out small to bigger bit or a torch. Making room for a 289-C-4 ! Thanks in advance Barnfolk.

Having some physical mobility issues and can't get under my truck right now. Can some Barner please post the space from backingplate to backkingplate on a stock 40 Ford pickup. I need to replace the third member completely. Thanks

Due to mobility issues ( injured back )I couldn't get under my pickup to measure the distance from backing plate to backing plate on the banjo. I need to replace the whole 3rd member. Thanks for any information.

Barners a little help please, I cant get the pedal assembly to sit flush on the frame rail, do I need to remove both pedals then re-install with the snap rings. Thanks for any answers

looking for a 40 pick up drivers side door latch assembly. found one thanks

Barn folks I'm trying to remove the drivers door latch and handle from my 41 pick up , I know only 7 screws, but it seem the latch arm goes through the window crank mech ??? Is there a picture on Van Pelt or any tricks. I appreciate your help and a big thanks to all Vets !!!free pancakes at...

Barn folks can anyone advise me on the size socket that goes over the crank slot and onto the hex nut on a 59ab 40 or 41 V8 lower fan pulley. Thanks in advance

Anyone have two or three hubcaps in used shape, dents okay, pitted chrome fine, curb rash What do you have / thanks for reading