Search results

Need a front lower passenger side cowl patch for a 1934 5 Window Coupe. I have the drivers side. Would consider purchasing both sides if the price is right.

How is the original vacuum motor installed in the roof header panel on a 1934 Ford 5 Window Coupe.

I am doing the interior on my 1934 Ford 5 Window Coupe. I need a paper or cardboard pattern so I can make my own lower cowl side panels. The repros are very expensive and I plan to use ABS. Thanks

I about to start on the interior of my 1934 5 Window Coupe. I want to make my own lower cowl side panels and need a paper or cardboard pattern of the panels. I will reimburse you for any expenses incurred. Thanks

I am getting ready to start on the interior of my 34 5 Window coupe and need a pattern for front kick panels.

Re: Patch Panel Sequence 34 Ford 5 Window Coupe I am in the process of installing the front cowl, rocker panels and rear quarter panels on my 34 coupe. What is the proper sequence for installing the patch panels.

Re: 34 Ford 5 Window Coupe Vacuum Wiper Motor Just acquired a vacuum wiper motor for my 34 Ford 5 Window Coupe. Looking for photos and/or directions on how to install the motor. Also, I have the original header panel for the coupe.

Re: 34 Ford 5 Window Coupe Front Cowl Patch Need a right front cowl patch for a 34 Ford 5 Window Coupe. Would consider buying both sides depending on the price.

Re: 34 Ford 5 Window Coupe Height Rear Vertical Supports What is the height of the 2 rear metal vertical supports located in the trunk area of a 34 ford 5 window coupe?

Looking to buy a working Stewart Warner Stage 3 volt meter.

For sale unsplit 1928-31 Ford Wishbone. Perches and ball are solid without any chips or gouges. Can split for easier shipping. $100 plus the ride.

Looking for large rear and front fender braces for 34 Ford 5 window coupe.

I need to locate and drill the mountings holes for the rear spreader bar on my 5 window coupe. With the frame sitting level on a dolly, what angle should the rear tire mounting bracket be set at so that the rear gas tank cover fits flush with the rear of the coupe? Thanks

I am ready to install the windows in my 5 window coupe. I have seen kits for 33-34 3 window coupes advertised on the web. Will a 3 window kit fit a 5 window? If not, is there a supplier that offers a 5 window door channel kit? Thanks

Up for sale is a vintage Ford V8 emblem that was installed on Fords built in the 50's (1950,51,52,53,54?). The emblem is approximately 2 3/4" wide x 2 3/8" tall. Both mounting pins are intack. Emblem does have some pitting. Good for a daily driver or good candidate for rechroming. Asking...

I just finished unchanneling my 5 window coupe and have aligned all the door and trunk gaps. My next project is to install new front cowl, rocker and rear quarter panels. Should I begin installing the cowl panels first followed by the rocker and rear quarter panels? Thanks

My 34 Ford Coupe was channeled at some point. I am in the process of returning the body to its original height. I was looking at some interior photos of 3 and 5 window coupes and noticed that there are 2 braces that fit between the front part of the trunk opening and the rear floor. I want...

Up for sale is brand new FlexiKool 13 x 2 I/2 inch curved blade 12v 120w 1400 CFM heavy duty reversible radiator fan with mounting kit. I bought it for my 34 Ford Coupe and had some radiator/motor clearance problems. I have no use for it and will let it go for $20 plus the ride.

I have two questions about installing the rocker panels on my 34 5 Window Coupe. The front subrails have a lip that runs the length of the rails. Does the rocker panel fit on top of this rail or does the rocker panel go over the lip? Second what is the best way to attach the rocker panel to the...

I am currently installing new subrails and rocker panels on my 34 Ford 5 Window Coupe. I have the subrails and rocker panels mocked up to check for placement. Viewed from the inside, I have a gap of roughly 1 inch between the inside of the door and subrail. All the door gaps are equal and the...