Search results

I’m looking for a usable 1940 ford pickup door latch for the drivers door. Anyone have one they want to part with. Thanks Mat

Been working on my 40 half ton pickup and ordered a new transmission cover and the back of the new cover has a tunnel where the driveline or something would go through. The issue is the floor in the truck is flat. I looks to be the original floor it has a 85hp flathead and a 4 speed which is...

42-47 for pickup be great shape, a little surface rust in the front. Comes with tailgate and some wood for the floor. Call or TXT mat @ 806-three four one-7949. Located in Vernal UT

I’m getting ready to put the cab on 1940 ford 1/2 ton. Any one have any tips or techniques they would recommend? Also should I treat the cab mounts since they are wood?

Does anyone know if the cab doors on the 46 Ford pickup are the same as a 40 Ford pickup? I need to replace one door and found a 46 pickup locally. TIA

Hey guys getting ready to put the cab on the finished chassis. Does anyone have any pointers to make this go easy as the cab was off when I bought it. Also what bolt size is used to secure the cab to the frame if anyone remembers this would be helpful. Thanks in advance and Ill post some...

I am trying to figure out how the fuel push rod goes back in to the motor. mine had an electric fuel pump and I am switching it back. Does the push rod get placed in before the intake manifold goes on or does it dropped in from the top after? My intake has this in it (see Pic) and I am not...

Im rebuilding a 1940 24 stud I was able to remove the old studs but I am having issues installing the new ones. The new studs do not seem to go in all the way to the shoulder. I spent the money in the arp kit from reds... anyone have any ideas on what to do?

I am putting in new head studs and am looking for a schematic that tells the proper bolt length for the proper hole. Has any one come across one of these for a 24 stud motor or is this a trial and error type deal?

I am having trouble getting my new brake drums on my pickup, the brake drum does not want to sit right when i put it over the brake shoes, it sits low and wont go over the backing plate. I have had the drums turned and shoes arched, and adjusted the the brake shoes at the bottom and the top...

Have this flathead which is a 59 block 24 stud, but it has 81A heads according to vanpelts 81A heads were used until 42 and that block didnt start untill 46 . Am I right to assume that the block was a replacement block (possibly) or and I way of target here? And does anyone know what the 99A...

I was working on my 41 pickup and came across some numbers stamped into the front cross member any know what these numbers mean? 11C 5020 is what is stamped on it. thanks for the help mat

I am looking for an original 40 ford 1/2 ton pick up frame, however from what I can see 35-40 frames were the same as were the 41 pickups.