Search results

  1. Brian in Wheeling

    exhaust manifold coating

    Anybody try one of the high-tech manifold coatings? If so, what has been your experience. Not talking here about fizz can paint jobs with barbecue paint, just the specialty shops, like Jet Coat, Cerama-Kote, etc. Brian
  2. Brian in Wheeling

    Question about posts

    To me, it seems like a lot of posts - perhaps recently - don't really have to do with the model A issues. Am I wrong? Maybe so, but I'm a member to see and learn about the cars. I'm probably missing something. Too much unrelated conversation perhaps? Friendship is good so I guess that's what...
  3. Brian in Wheeling

    Head Gasket

    Is the FelPro 7013 gasket any good? I found a few in my basement going through some parts boxes. This would be used say on a .040 / .060 overbore.
  4. Brian in Wheeling

    Please try to be specific in your title

    Sorry- but a pet peve is folks starting threads with titles like....Oh I did it again, or what's my problem, or- Look at this, etc. It does nothing for the archive or if someone actually wants to help you with your SPECIFIC problem. Said my peace.
  5. Brian in Wheeling

    33 pickup wiring diagram

    Anybody have a link for 33-34 pickup wiring?
  6. Brian in Wheeling

    Model B 4 cyl guru

    Who is the 34 model B guru?
  7. Brian in Wheeling

    harmonic balancer

    Has anyone heard of using a crank pulley with a harmonic balancer, or even if one could be fitted, would there be any benefit given the heavy flywheel? Brian W.
  8. Brian in Wheeling

    Oil on head stud?

    How does one get oil around a head stud? My friend has a 31 and has what he believes to be a leak around a center head stud... actually the second stud back from the front in the center of the head. Looks like it is leaking a bit over the head. Thought it was a spark plug but no. Brian W.
  9. Brian in Wheeling

    Correct top material for a 29 Tudor

    Is it long grain or short grain? The old one I removed was short grain as compared to my friends 31 Tudor. Thanks, Brian W.
  10. Brian in Wheeling

    29 tudor rain gutters

    Opinions please. For a non-points car. Which two piece side rain drip rails are "best" i.e. easy( or easier) to install and look good the aluminum or the original steel? Also, are there instructions for bending the rear two piece steel top moulding? How does one do this to not screw it up...
  11. Brian in Wheeling

    29 Tudor paint scheme confusion

    I have the paint quite, but have seen 28-29 tudors painted in different manners in terms of lower body and reveal colors ( see below). My car is a mid year 29. I would like to do it "right". So, I guess I'm a bit confused. So, what is correct for my car? Thanks for your help. Brian W.
  12. Brian in Wheeling

    headlight connectors

    What do you all do for H/L connections? I've had fits and shorts with the repos parts, been able to modify them to get more reliability, but my buddy just hard wires them with separate bullet connectors. Can anybody make a correct part? Brian 29 Tudor
  13. Brian in Wheeling

    Identify these carbs

    O.K. Please help and identify these carbs for me. I will then move over to the swap section, if there is any interest. Thanks Fordbarners! Brian
  14. Brian in Wheeling

    What would cause this?

    Pictured is the back half of a two-piece pulls I removed from an engine that had been running and not leaking out the front crank seal. What would cause the severe wear on essentially only one-half of the unit? Bent crank end? I wonder what the timing gear would look like? Any ideas?
  15. Brian in Wheeling

    Late 31 AA stake bed truck

    Nice very clean 31 AA truck. I believe it is the 157" wheelbase but not sure.Full steel roof, no rust, decent( nice but not perfect) wood on the bed. Good tires, rebuilt steering and original engine. You could work this truck or with a little work...show it as it is that nice. I will try to post...
  16. Brian in Wheeling

    1931 Deluxe Tudor

    Question: How many here have seen an original 31 Delux Tudor? I mean a factory made one not a standard Tudor someone has later "made" a deluxe. Also, can anyone provide a source for factory production numbers for this model? A friend has had what we believe to be an original factory...
  17. Brian in Wheeling

    Front brake / wheel locked up

    Driving down the road, made a mild right, touched the brake and the right front wheel locked solid. Won't go forward, goes fine in reverse, so I backed up the 200 yards to my home driveway. Now to pull the wheel and drum and see what's up! Does have the equalizers on the front...not Teds, I...
  18. Brian in Wheeling

    OT - coil specs

    I have a Lucas Q12 coil dated 8/47. What should the coil resistance measure? I show 4.5 ohms on the primary and 17.08K on the secondary. This takes in account the resistance of the meter leads. I know coils can test good on the bench but fail when placed in service/ hot, but I am just trying to...
  19. Brian in Wheeling

    31 Deluxe Tudor production

    How many 31 deluxe Tudors were made? Brian W.
  20. Brian in Wheeling

    Bless you all!

    May this Holiday season find you all in peace and happiness. God bless us everyone! :)
Back
Top