Search results

Looking for the 15" long (May 1929-31) oil return tube (the long one) and a magnesium side timing cover like the one shown here; http://www.fordgarage.com/pages/sidetimingcovers.htm

Looking for a set of 35-6 perch pins...don't care if the threads are junk.

My apologies in advance for this odd request, I'm trying to find the source of a 2" or 2 1/4" long (bolt-to-bolt, not width) shackle. I believe the 42-48 fronts are close to this size but don't have any on-hand to measure...hoping someone can point me in the right direction. (And yeah, I know...

Picked up a B starter & switch for my hopped-up A...curious if a gasket is used between the switch and the starter (like the Model A uses). I ask because there's not much distance between the contact on the switch and the post on the starter...the lever on the switch only moves 1/4" or so...

Hey guys, tried a search but came up empty... I know the Stipe high volume pump is normally used in pressure applications, can it also be used in a splash-oiled setup? Was thinking that more volume might provide some insurance at higher RPM (I'm using a SCAT crank, babbitt bearings). Thoughts?

Looking for; 4 blade fan - don't care about the condition of the blades; only need the pulley Front spring shackles - original only; no repro 30-31 Emergency brake cross shaft Please pm if you have any of these parts!

Looking for a LH (driver's side) tail light bracket, original or period aftermarket - no modern repro junk. Thanks!

Looking for a 1915 T rear license bracket as pictured below...willing to purchase the entire tail lamp bracket if needed. Please send me a PM if you've got one!

Although my interest primarily lies in hot rods (I'm building an early 40's style T RPU on an A chassis), closely approximating many of Ford's factory finishes is extremely important to me for an 'authentic' feel. My thirst for accuracy has led me to experiment with asphaltum paint - the dozen...

Thinking about using a B starter cable (and switch) on my hopped-up A...curious if someone could provide some details on said cable. From the few photos I've seen, it looks like a basic choke cable...did it have a special fitting on the end (starter switch connection)? Anyone have a spec on...

Howdy fellas, please forgive me if this is a repeat question; I searched the site and Marco's website and could not come up with an answer... What is the correct finish for shock bodies & arms (working on a May 1930 chassis)? From the chassis photo on Marco's website, it appears that the shock...

Found one...thanks Ford Barners!

Trying to identify a group of speedos a pal of mine has...some are clearly not A - curious if someone could provide the bezel diameter of the mid-30 to 31 round speedo (just the part that fits through the instrument panel) Thanks!

Got a phone call last evening from Robert Paul; Model A shock rebuilder extraordinaire...he's back up and going again after thieves broke in and stole a good bit of his specialized equipment/tools earlier this year. Just thought I'd pass it along...Mr Paul is a true craftsman and I'm happy to...

Looking for a decent set of A pedals. Please let me know what you have!

Looking for a usable 32 or 33-34 pitman arm...please PM if you have one; cash in hand :) Thanks!

Hey fellas, I'm working on a semi off-topic project (late 30's/early 40's style gow job; T roadster on an A chassis) and need some steering help. I'm going to ditch the A steering box in favor of a 33-4 15:1 box but I need to use a longer steering shaft (the 35-36 46.50" shafts would be...

Found this image online...was curious if this is an authentic 32 Commercial color; Does anyone have a photo of a Mountain Brown '32 commercial?

I understand that the '37 Deluxe (Banjo) steering wheel and column were painted brown (presumably "Seal Brown")...but what type of paint was used? Lacquer or enamel? Thanks!

Looking for a decent 28-29 Hood (just need the top but would consider a complete one as well). PM me if you have one!