Search results

I need to replace steering box on my 48 Ford Car. It has electric power steering. What is a good brand to buy ? Thanks

I am replacing old steering box with a cardone #27-6556. Do I need to buy a new Pitman arm, Thanks

LOOKING FOR DIMENSIONS ON 48 fORD CAR REAR HUB. My bearing slides back and forth, Is this normal / Thanks

How do you remove snap ring on 48 Ford Car, the ring that holds grease seal n rear hub, Thanks

1948 how to remove snap ring on rear hub in front of grease seal;, Thanks

How do you get the snap ring out in front of grease seal in rear hub. Thanks

I'm replacing fitting on side of gas tank. How far should the line go through fitting into tank, thanks

Has anyone bought lug nuts from them for 48 ford car. I can't seem to get hold of them. Do the threads start in a ways on the nuts or start at edge ? Thanks Steve

I have a 48 Ford that converted to open driveshaft. How much play up and down on the yoke, Thanks Steve

This summer I have had to replace right rear grease seal 3 times on my 48 ford conv. What could be worn that would do this ? Fluid is down about 3/4" below fill plug. Also bearing seems to float back and forth a little bit. Thanks

I took the horn apart on my 48 ford and tipped the bowl of parts over and can't figure how it goes back together. Looking for detailed parts diagram. Thanks

What is a good 12 volt headlight bulb to use in my 48 ford ? Thanks

I'm converting my 48 Ford to 12 volt. I found a reducer BWD VR1. It says it will handle up to 4 AMP. Is that large enough to run heater motor on high. Thanks

I'm converting my 48 Ford to 12 volt. What size battery would be best to fix in stock battery tray. Also what is a good coil to use with stock Ford Dis. Who makes good drop resistors for gauges, heater motor. thanks for any help.

What is the torque for oil pan on 48 Ford and Alum heads on same engine ? thanks

I'm thinking of converting my 48 Ford to 12 volt. Can you buy a bracket that will take a GM 1 wire alternator without machine work. Why I want to go this route is if I should have to replace on the road I could go to any parts store and get a stock GM alternator 1 wire. thanks

Looking for a good cleaner to clean my alum intake and heads. Something I can use that won't hurt the engine paint. Thanks

I am looking for a mirror for right side of my 48 Ford Conv. Does anyone made a new one with the base as wide as side chrome ? Also any that will bolt to door that you can see from drivers side ? thanks

My horns don't sound good, can they be adjusted. Also the thin metal pieces between bracket and horn are weak and a few broken. can you buy new pieces. Thanks

My car has the rear hubs on outside of drums. Can I use the drums that mounted outside of hub on my hubs. Can't find any inside drums. thanks