Search results

Hi,,what exactly does the 34 gas tank drain plug consist of? Is it a pipe thread plug,,1/4" ×18 with slightly taped threads? Or, is it a type of bolt/bung hex head using a copper crush washer? The last thing I want to do, is damage the tank threads. Anyone? Thank You!

34 Stock fuel line Routing, Can anyone tell me, or post a picture of how the fuel line's route at the rear cross member to the fuel tank? Also, a picture of it running along frame rail and into fire wall would help alot! Thanks Gentlemen

Howdy, Any suggestions on replacing my 34 gas tank? Mine is rusted pretty bad, and dented, also repair work done around bung area of tank. Still going to use 6 volt system, probably need sending unit, that accepts stock fuel lines also. I was thinking on trying to get my tank cleaned out,, but...

Howdy all, Does anyone know where I can purchase rear perch bushings for a 34? I used the hacksaw and socket technique to get the old worn ones out. A bit difficult, yes, but they came out. Is there a kit that includes the bushings (shells) , and new pins? I was told that the original pins were...

Howdy boys, OK heres the question for 33/34 ford coupe owners. Where exactlly does the hose that is attached to the rear window drip tray, EXIT the car? Ive looked for posts on this and couldnt find much on it really. Im thinking its somewhere down in the lower right quarter panel area, but...

Howdy all, I have a question are the gas pedal assemblys the same for both flathead v/8 and 4 clylinder cars the same? Yes,,,, Im new to all of this, Im trying to build up a 34 coupe, its definately a challange for me. Ive talked with a couple of folks (via phone) from the ford barn and they...

Howdy all, Im still looking for the small metal brackets that tie the wood bows to the bottom of the roof trough. I dont have these for my build, (in fact Im not even sure what they look like really). If anyone out there even had 1 that I could use as an example, that would be great! please...

Howdy all, I was wondering who sells good 34 coupe wood bows? I guess Im talking good fit, quality ect. Also Im in need of the 4 "U" shaped metal peices that hold the bows, I belive that screws hold them in place through the bows and the roof trough ( could use 1 and use it as a pattern for...

Does anyone have a picture of the 2 wooden bows and the brackets (pieces) that hold this assembly together? I need the brackets , parts, to do this as I have none of them. Thanks

Im trying to bring back the roof opening on a 5 window that was cut and filled. I would need the roof trough and aproximately 2 to 3 inches of roof material surrounding the opening, but mainly the trough. Does anyone know if other car years used the same trough? or has anyone else out there done...