Search results

A nice pair of 34 - 5 window coupe regulators. Cleaned and etch primered , the 4 glass channel rollers will need to be replaced.

32 - 34 B' block in nice condition, sleeved back to standard on all 4 cylinders, standard pistons and B' rods. Block was machined for insert bearings, and all sets of bearings are there - but I don't know what size they are ??? :eek: The crank shaft that this was done for was removed from this...

I have a nicev34 B' engine and trans that was removed from a running car imported from Argentina, and the owner wanted to make it aV8 hotrod. Acquired this for my lifelong friend Dave, but unfortunately he died and we never got to build his dream A' coupe. Can't figure out how to post...

Interested in finding a good condition 1932 bumper ( or 2 of them ) for my 1933 pick up truck project. I like the looks of the 32 bumper rather than the 1933-34 styles. Thanks, Steve

Looking for a 32-34 pick up cabs roof section, or just a front /rear section of anything that might not be rebuildable ? Thanks, Steve

I have a rebuilt 8ba motor from Dennis FRings and an empty flywheel that I believe is correct, but he did not supply one with the motor. Would this be the correct clutch & pressure plate I need for the setup? It does appear that it's correct from the pictures, and the pressure plate has...

Once I have the flywheel cut down and balanced, would this be the correct clutch & pressure plate I need for the modified setup? It does appear that it's correct from the pictures, and the pressure plate has the exposed counter weights. Would this also be correct for an 8ba flywheel...

I am looking for a good solid rear axle - good taper and fair key way, but the threads can be junk or totally missing from the axle. This is not for a service replacement, but I am planning on making a fixture to use in my lathe for facing hubs, boring out bearings and drum facing. I only...

32 - 34 pick up doors - OR - door parts Looking for left & right doors for a 33 pick-up truck, or upper door sections from the belt line up ! any help is appreciated. Thanks, Steve s.hackel@att.net

I am looking for a frame for my 33 pick.up. Front axle probably, rear spring probably, but nothing else. I'm not interested in a long term rusted project, something solid..... Thanks, Steve Hackel 708 334 3778 s.hackel@att.net

Looking for a 1933-34 pick up roof and cab rear panel. The most important portion of the roof is above the B' pillar to the back, and the most important portion of the back panel is from the B' pillar to the curve to the back. Any help would be greatly appreciated. Thanks, Steve...

Looking for a steering boxe shaft with good threads and taper, I don't care about the condition of the worm gear at all ! I am doing my own F-100 steering box conversion that someone had tried to convert the box to "U" joints and a modern column, and cut the F-100 shaft off above the box...

Looking for a good steering box shaft, with good threads and upper taper - I don't care about the worm gear at all ! I'm in the process of doing an F-100 steering box conversion myself and need this to make repairs to the F-100 shaft that someone cut off while trying to adapt "U" joints and...

Looking for the center hub from an A' or any Ford steering wheel with a tapered hub - I don't need the spokes or wheel / rim ! I am going to make a wheel adapter with this to utilize a later style wheel on a project we are working on - the shaft taper needs to be good. Someone must have...

Hello; I am trying to locate both tge worm gear and sector shaft in a 15 to 1 ratio , newvof course. Anyone with a set, please contact me. Thanks. STEVE HACKEL s.hackel@att.net 708 334 3778

Can the firewall of a 33 pick up truck, with a 4 cylinder motor, be removed - or is it welded in place like the model A's were? Trying to resolve old issues with a heater, heater hoses, way too many extra holes etc. Figured I'd ask the "go to" guys for the answer before blindly attempting it...

I need both the upper and lower steering box races and bearings to rebuild the steering box in my 1933 pick up truck. The upper shaft was cut off at some point in its history, and they welded on a solid Chevy splined shaft in its place in order to mount a lAter style wheel. If you have a shaft...

I am in need of a "rebuildable" 1933 / 34 steering box, or only a good used steering shaft, as mine has been cutoff and another something :confused: has been welded on in its place. I need a full column cover, and either a 32 column drop to fit my 33 truck dash, or a 33-34 column drop and I'll...

I have a 33 pick up with a something ? Chevy steering wheel currently mounted to the column. Other than a stock 33 wheel, what years will fit up to the steering shaft without any modifications? In searching the for sale adds it appears that a 33 wheel is difficult to locate, but I don't need...

I am looking for the upper 1/2 of the 1932-34 4 cylinder flywheel housing that attaches to the rear of the block and the top of the oil pan flange. This is what the transmission would be attaching to. I m looking for one with a very faint or no vin # stamping at all ! I need this to finish...