Search results

Need to pull rear brake drum from the axle. I have put maximum torque with a genuine Ford rear axle puller, have also tried heat and puller, air impact gun with genuine puller. My next trial will be a air driven carbide cutter to cut a relief on the hub. Any advice appreciated.

Need a 46 hubcap in good to new or repop condition. Lost along the road somewhere. Want a match for the three Drake caps on the caar. Call 541-990-7377 or email at paulingram3@comcast.net Thanks, Paul

Can anyone provide the number of 1946 woodie station wagons were produced. They should be stamped with 6GA on the upper firewall. Any information or source to look is appreciated. Please email me at paulingram3@comcast.net or phone 541-990-7377. Thanks, Paul

1950 club coupe, 4 1/2" sectioned body. All body and frame blasted and in primer. No engine or transmission. Floor and rockers replaced where needed. New rear quarters need to be welded in and will cover the sectioned weld area. Sectioned cuts need to be completed and smoothed. 51 hood...

Looking for a NOS or very Good used H-10 Champion spar plugs. Need 6. Thanks, Paul Please reply with email

Just came across what I was told is a fixture for setting the early Ford distributers. Only thing I have to go on is the name CHEC RITE. If anyone has the instructions for this device I would like to get a copy. Sorry I am not adept at posting pictures. Paul,

Have the following Ring sets, Main Bearings, cam and rod bearings available. All in Ford boxes. I would prefer to sell all as one lot but will take Names and offers for individual items and will consider individual sales after a week or two. RINGS: 99A-6149 F2 .060 3 sets 99A-6149 E2...

Am in need of rear quarter patch panels for my 50 Ford. Not sure if I will live long enough to order from the dealer that makes the panels that everyone says are the best. Can anyone give me feedback on Mac's, or other suppliers? Paul

Need a radio restored for my 46 woodie. Have had it to a local shop twice now and the wonder bar and foot control still not working properly. Any one have a recommendation for quality work at a fair price?? Thanks for any leads. Paul

Have major trouble with the "adapter" coupling for the driveshaft to the pinion. Seems that the coupler (10 spline to pinion, 6 spline to driveshaft) spins out where the two are connected. Can anyone give me a "proper" fix? Have set the coupler up in the lathe to assure it being true, then...

Have been running rich with a 65 jet in my flathead 6 cyl. Installed a 60 and still plugs have build up of carbon. Any advice or help appreciated. Paul

I am in need of the running board stainless for a 1946 Ford station wagon. These are 62+" long. Need fairly nice that can be restored and polished. Thanks for any help. Call me at 541-990-7377, or email, paulingram3@comcast.net Paul Ingram

I have a cluster gear that is a 68-7113-A. Has 4 notches at rear, uses cage rollers, tooth count is 28-24-18-14. I am having trouble finding and installing the proper input shaft and gear. I have found one that has Ford part number 8M-7017. This input will work very well, and has a gear...

Proper engine for a 32. Block, heads, Pan, intake and exhaust, cam cover, water pumps, fuel pump, generator, all correct for a 32. The block has had a crack on the inner lower rail. Appears to be properly done. I have pressure tested it and can get an indication of air leak at 25+ pounds...

Can anyone give me the float setting and normal jet size for the 46 Ford 6 cly. carb? Call me at : 541-990-7377, or email me at: paulingram3@comcast.net Thanks, Paul

Am looking for the bracket that holds the outer ring of the spare tire cover. The bracket attaches to the outer ring and extends down and is held to the large carrier on the tailgate. I have all the ring, cover, and spare tire mount. Hoping that someone has a ratty rusty outer ring with the...

After many phone calls, and emails I have about given up on finding these cables for my 6 cyl. Ford. According to , the "green bible" these are the same from 1942 thru 1948, with the throttle cable 53", and the choke 43". I have a set of reproduction cables for the V8 cars which are just about...

After many phone calls, and emails I have about given up on finding these cables for my 46 Ford. According to , the "green bible" these are the same from 1942 thru 1948, with the throttle cable 53", and the choke 43". I have a set of reproduction cables for the V8 cars which are just about 12...

Am in need of both the throttle and the choke cables for a 46-48 Ford 6 cylinder. Need both and I have a set of cables for a V8 to trade or sell. The 6 cylinder are considerable longer than the V8 cables. Want good used or will take rusty and crusty to use for patterns. Thanks for any help...

Looking for a switch for a 46 woody wagon dome light. This switch I attached to the dome light. Condition of light is not important, I just need a good switch and can make it work on my dome light. Please call me at 541-990-7377. Will be at Portland swap meet stalls 8166-8167-8168. Thanks, Paul