Search results

I notice some interior door handles in one location and others in another was there a mid year change?

Looking for a 1938 fuel pump stand in decent condition

I purchased a 1938 ford coupe in 2008 from a dealer Hooked on Classics in Watertown MN and am trying to find any History/owners of the car. Car has a 21 stud flathead a chrome dash and at one time had parallel leaf springs. If you have any information on the history please let me know.

What was the factory rim size and back spacing on a 1938 Ford wide five rim? and how would that compare to the 5x5 1/2 rim of the 39 Ford

Will a 1947 1/2 ton ford truck hub/drum fit a 39-47 ford banjo backing plate? car banjo

I like to drive my car but sometimes a trailer would allow me longer distance trips. I am considering purchasing a auto trailer price is a factor so I am wondering what advice or things to look for or things that I should not live without prior to starting my search Steve

What do the Banjo rear end axel tube grease fittings grease it does not appear to go directly to the outer bearings when looking at a rear end although when you look at the parts drawing it appears that way.

I have pulled the hub/Brake drum using the correct puller off my 1940 ford in the past it took some effort but felt correct. I just pulled them off my 38 let me start by saying the hub nuts did not feel very tight, when I pulled the hub off with the correct puller it did not even require a...

Has anyone ever participated in a concours d'elegance show and what were your thoughts on the show/experience?

This is an original car. owned for the last 15+ years and just ready to pass it on. Recently replaced to ready for sale Gas tank removed cleaned and coated, fuel pump replaced, carb rebuilt, distributor rebuilt, new plugs, wires, new coil and I am currently in the process of replacing all the...

I need any advice on how to of transmission removal in a 1938 ford coupe, any tips tricks or advice would be greatly appreciated prior to my removal thanks in advance.

I am having a problem starting my 1940 Ford after it is warmed (not overheated) it starts right up when cold no problem it cranks fine. It seemed as if it was not getting spark I originally thought it was the timing verified to the best of my ability it was correct replaced points condenser...

Just as a thought I was wondering if anyone had any comments about why Henery went with the closed driveshaft over open? What are the benefits/Shortfalls Just personal curiosity as I am getting ready to pull a transmission out of a 38 ford for the first time, ow yea does anyone have any...

Does anyone have any information on these heads I believe they are factory Ford could be wrong they are 21 stud I have heard of high compression heads but do not know how to confirm, my concern is if there will be an interference with the valves on an early 38 21 stud motor.

I seem to be unable to find the axel nut torque for the nut does anyone know what it is?

I am having trouble removing the rear drum on a 1940 ford sedan I have removed the cotter pin nut washer and gasket from the center of the drum is there something that I am missing? I know this question is basic but I would rather ask now then wait till I should have asked

Looking for some 21 stud 1938 flathead heads looking for aluminum Made in Canada or something more interesting let me know what you have.

$11,500 This is an original car in good conditition. owned for the last 15+ years and just ready to pass it on. Recently replaced to ready for sale Gas tank removed cleaned and coated, fuel pump replaced, carb rebuilt, distributor rebuilt, new plugs, wires, new coil and I am currently in the...

1947 Ford Coupe Hood in great shape buyer responsible for pick up