Recent content by visionary

Thanks Mitch i guess after pulling the vinyl tight any imperfections will disapear.

It looked like the second picture you posted was the vinyl material. so if thats the foam, it also goes all the way out to where the gutters atach?

Mitch do you have any pictures of the padding installed pryor to the vinyl? thanks Scott

Mitch, is that black material in your picture foam or is that the muslin sheeting? i ran the sheeting to the iner roof opening, but i was woried that the foam would be to wavy and puckered up from the nails. and after the vinyl is placed over it, the outline of the roof opening would show...

geting ready to replase the roof on my 30 tudor and i'm not sure if the foam padding should stop at the opening of the roof where the side rails for the bows or go all the way to where the vinyl ends where the rain gutters go? thanks Scott

Hey guys i'm looking for front u bolts for my 29 ccpu. tried macs and snyders and there both out of stock. any thoughts? Thanks Scott

I had mine rebuilt by snyders in Ohio, it was a 3 hour ride for me from the western end of NY so i personaly delivered and p/u . i was very impressed with the service and quality of the rebuild, i dealt with Don Snyder personaly and couldn't be more happy. i think if you strip it down to the...

Thanks Bill, at least now i know what i need to do. Scott

Here's a picture of the bolt head that i'm talking about, it's placement makes the lower spring useless as the threaded plate that the stud goes into becomes traped under the bolt head holding the fender support to the frame. I must be doing something wrong. Scott

Steve, thanks for the pictures. The fender supports on my 26 use only one bolt and its aligned dead center with the radiator mount stud. doesn't seem right but looks factory. Scott

Thanks for the info guys, after slowing down and taking a closer look i think i've figured out what's going on here. the studs are not standing straight up, their actually kicked outward toward the fenders, and i cant move them inward. i know this sounds stupid but the bolt head on the inner...

If someone could measure thier 26 or 27 then i'd know for sure, but like i mentioned the apron holes line up perfectly dead center with the studs. i believe the radiator may have been replaced and i was wondering if it may be the wrong year radiator? or the mount holes incorectly placed...

Hey guys, i've got my motor back from snyders and i've had it running for just a couple of minutes as the radiator isn't installed just yet, and this is what i need a little help with. when i removed the radiator eatch side had one spring on the underside of the frame and none on the top side of...

Thanks for the update, i'm glad you caught it before real damage ocured. I know the head on my T was warped bad, they had to take .025 off to get it back straight. $30.00 cash to the machinist and all was well.

If you havn't already done so i would have the head surfaced at a machine shop, it's pretty cheap insurance. I know most guys use the copper gaskets that are folded over very succesfully, but while putting my motor together i didn't feel comfortable with it and ended up using the composit one...