Recent content by U.P. Ted61741

in the Ford guidelines book, has two places that explains what color black to paint undercarriage and engine parts. They contradict each other Engine finishes are black, dull black, raven, and terne ? Undercarriage finishes are satin black, semi-gloss, gloss, and raven. Can anyone help me...

Thanks Bob C. This answered all my questions except I wonder if anyone has a KW Wilson tool or some other method to assemble the clutch.

I recently disassembled my clutch. I thought it looked pretty straight forward, but after cleaning and starting reassemble I have run into several questions. 1. How many of the discs have thicker teeth? is there one or two? ( Speaking of the metal discs) 2..Are the metal discs supposed to...

What is the proper tire pressure for a 4.50 x 21 tire?

I recently purchased some ford Engine Green Enamel paint from a Model A supplier. When I received the paint can, it was a blank can, no directions on how to use it. The catalog directions said to clean the bare engine before painting with metal prep from PPG auto paint I couldn't find PPG so...

Tom, were there lock washers on the four bolts?

Brian NJ, I thought someone would have a home-made tool that might work. thanks for the info. One question, I took two mdclutches apart. One had lock washers and one not. Do you know which is correct?

I'm in desperate need of a KR Wilson tool so that I can get my multiple disc clutch back together. Can anyone help me out??????????

Thank you for your quick reply. I might take you up on borrowing that tool, however, I'm going on vacation for about 3 weeks, so can I contact you when I return? Thanks, Ted Burson

I have a MD clutch apart and need to replace 2 discs that are worn badly. I have read that I need a KR Wilson tool to get the clutch back together properly. First of all, does anyone reline these discs? Secondly, where do I find the KR Wilson tool?

When I turned on the headlights they were fine. Then drove about 100 yards, the lights got very bright for a second and quit working on both beams. I suspect they are burned out but haven't checked yet. Can anyone tell me what the problem might be? My powerhouse generator was recently...

Why can I only get 5 oz. of 600 wt. in the sector housing? It should hold 7 3/4 oz. I heated it so it's not too stiff.

I am also working on a wiper. Did you have to get a new base? I can't find any place that tell me exactly where the wire runs or how many of the clips that hold the kick panel should be used and if those same clips are used on the driver side. I'm in stalling it in a 28 tudor. You mentioned...

The 3 brass shims at the bottom of the steering column are the adjustment for end play. Is a paper gasket also supposed to be applied before these shims?

I have an August 1928 tudor. I'm replacng my cowl panels and found my wiper wire taped on the passenger side with three clips and grommets. the middle clip has a u-shape piece on it that the cowl panel must fit in. What route the wire take? I think it is to go to the junction box but how...