Recent content by Todd68390

My original floorboards with 2 coats of Minwax Ebony stain.

I have these in my car: https://www.logolites.com/products/led-headlights-and-bulbs/led-headlights/focused-beam-led-headlights/

I'm looking for a 1939-40 heater hose bracket P/N 91A-15151 as pictured.

Already tried Ecklers and All Ford Parts. CW Moss pictures appears to show two of the 91A-15152 brackets. I really just need the angled bracket 91A-15151.

Does anyone know a source for 1939 heater hose bracket P/N 91A-15151?

Happy Birthday!

Looking for a 1932 K member leg left side leg. Thanks, Todd

Chris, I have a set of original pedals 1932 en route and will be correcting the pedal placement issue soon. I have decided to use Richard Lacy's parts for the hydraulic conversion portion. I cleaned up a few minor electrical issues and now the car starts instantly. I have some wheel spacer...

Rotorwrench and Charlie - Thanks for the tip on the wheel spacers. I pulled one of the wheels off this morning to check and there weren't any spacers there. I'll get some on the way. deuce_roadster - I met the previous owner about 6 years ago at a local car show when he was looking at my '39...

Glenn, My Dad bought the Corvette when I was about 11. I took it to my senior prom. I bought it from him when I was 26. I finished a frame off restoration on it about 13 years ago. It will be one of the last ones to go! Todd

DD, I could fabricate some of the pieces, but I don't have access to a lathe. It would probably be easier just to buy the parts from him. I'm sure I could fabricate the missing piece of the K member, but would rather install an original. The Bendix brakes would be a nice upgrade. I may look at...

DD, I've been looking at that thread about Dennis Lacy's setup and I'm thinking this is the way I would like to go.

Andy, I see now the diagonal piece from the frame to the crossmember is gone. I'll have to do some more looking.

Here's what I'm dealing with on the '32 I just bought. The brakes were converted to hydraulic long ago. The wheel cylinders were rebuilt, and the master cylinder was replaced recently. The brakes function well, but as you can see in the following pictures, pedal placement is not correct. It's...

Body # B520B-3033, frame # 18-95xxx, rumble seat car