Recent content by Stevef

Great advice from everyone...thanks...

Bill...what brand pump is it?

Thanks guys...4 replies in one hour! Yes a safety switch makes sense and tied to oil pressure would mean that if engine shuts down so will the pump...I have read something about "clicker" pumps vs. centrifugal the former allowing the mechanical pump to pull through the gas it needs...any...

Hello out there...have 51 V8 all stock in my 37 PU. Sometimes is just dies...might be vapor lock so I want to install an inline electric fuel pump. I would like one that I can just leave on and still use the mechanical pump. Anybody have suggestion as to brand. Do I need a pressure regulator...

Thanks for all the suggestion....back on track after Sandy and will pull the rear and look! Steve

Hi...I acquired a 37 1/2 ton PU with a EAB engine. Problem is the guy who did the work butchered the steering box bracket so the box does not hit the header. The bracket has now cracked. Bought a new one and there is no way the box will fit without jaming up against the header. So choices...

Did a bit more testing today....pulsing occurs as I release the clutch...more violent the faster I am going...so we are in 3rd, clutch in, downshift, as clutch goes out a pretty significant shake in the shifter and you can actually feel it in your butt! Once the clutch is released it stops...

Recently got a 37 1/2 ton PU. Finally got it driving. Upshifting is fine. But when I down shift from 2nd to 3rd I feel a significant pulsing in the shifter. It stops as the car slows. Also when I start in first from a cold start I hear a clunk, but that does not seem to occur again if i stop and...

I send a PM ...pls send me a pic and cost. Thanks

Looking for the cowl hinge and brackets for a 37 PU...I have the vent lid...looks like tyou might have them on the truck...I need all the bits and pieces except the screen and lid...also need the radiator splash that goes under the radiator. Thanks Steve

Looking for the lower radiator splash for a 37 Ford 1/2 tom PU...Thanks Steve

Hi...lookimng for a cowl vent hinge and levels ( I have the lid) for a 37 1/2 ton PU....also a radiator splash (lower)..Thanks

This Wescott guy is a scammer...he now sends a copy of his UK ID....very smooth...beware

Mark I assume the puller is long gone? Steve sforrer@erols.com