paul2748's latest activity

I understand the 54 256 had the same compatibility problems as the early 239.

I hope you understand that the 54 239 (block EBU) was a one year engine. Internals, like the cam, are different from all other YBlocks...

Sounds just like my 56 with the orig carb when it has been sitting over a week.

If I remember correctly, the tool goes in the way the handle points. Been a while since I have done one though. Have you tried it both...

There were some suppliers that offered retrofit racks. Sorry, I don't have the info on them. One problem that people noted about them...

Another that is supposed to be a bolt is the 65-66 Mustang 8 inch

Your best bet is to take the lock to a locksmith and have him replace it. He should be able to reset the new lock to your old key if it...

It is hard to find a replacement. No repros and used ones are not around unless your lucky. The only reproductions are TBird ones, ad...

Here are the measurement I have . From the top of the cup: To overall length 23 3/8 To the full mark 21 1/4 Tp the add oil mark 22...

Watch out - I tried to go to this and got some BS thing they wanted me to download.

Thanks Jeff

Nice

Make sure you have clearance in the rod the goes into the booster. 5/16-3/8 is good. When the brakes heat up, the fluid expands and...

Today I got four (4) emails of the same message from the Hamb. Can't anybody straighten this out? It was good for quite awhile but now...

To post pic here, it looks like all you have to do is do a copy/paste. I tried it from a pic on ebay and one from my computer and both...