Recent content by mizzougas

Looking for an original folding jack handle. Model A-17081-B used with C model jacks.

You can post it on oldgas.com It is a website for petroliana collectors. I've been a member for over 15 years and it is a great site.

Before going the repo route thought I would see if anyone has a good used origonal radiator shell emblem for a 1930. Thanks in adavance for any help.

He did a set for me also. About 10 months , many phone calls and excuses on his part and I got them. The work was very nice but the hassle was too much.

What are the differences between 28-29 and 30-31 rumble lids? I see vendorsselling the same skin for both but not same complete lids.

Thanks for all the suggestions.

Am ready to put the vinyl on my 31 S/W sedan. The instructions with the LB kit call for using a sealant under the edge of the material. Does anyone have any recomended products for this use? Thanks.

Looks like you have a 1930 pickup. If the bed is the original narrow body and not the late 1931 wide bed the 30-31 coupe fenders should fit.

Talking about the panel above the windshield. I thought it had to be cut and that sounds like I was right, Thanks for the replys.

Two questions, need to repalce header. Do you have to cut and remove metal header panel to accomplish this? On rear valance panel there are 3 holes on each end flange. Are these holes used to bolt to fender? I have an original fender with dimple and there are no holes for this? Thanks for any help.

I had a set of four done by him and I thought the cost was very reasonable. $65 per shock. The problem is the majority of shocks you find are not rebuildable. I needed about 13 to find 4 good cores. As mentioned in previous posts loose shafts is a bad sign. Frozen shafts maybe depending on why...

Bringing back to top. Had a few leads but haven't found one.

Have one inside door handle for my standard S/W 160A Four door sedan. Can use 3 or 4 to complete set. Thanks in advance for any help.

Looking for an original Murray 160A body tag for my 1931 S/W Sedan. Thanks in advance for any help.

I ordered a interior kit for my 31 S/W sedan about 4 months ago. The cost was actually a few hundred less than catalog price. My CC was charged half at time of order and the remainder when kit shipped. I did deal over the phone. It took 2-3 months to receive.