Recent content by JackB

I am building a 55 ford 1/2 ton pickup. I have a corvette power rack suspension. The rack is mounted in front of the cross member. I am going to install a 74 302 engine. The question is seeing the rack is in front of the cross member I will need a rear sump oil pan. Will a late model duel...

I am going to rebuild my 1953 8BA engine. I am going to use Johnson adjustable lifters. I see a\that they have both hollow and solid lifters. Why the different types and what sould be the best to use with a stcok engine rebuild.

I was told taht Ford has a non electrical operated overdrive. I want to bolt it to a 1974, 302. I have been told they made the manual shifting overdrive some time in the 1980's on mustang, t-birds and cougars. I need to find out what years to look for. Any information will be appricated

I want to put power brakes on my 57 ford Fairlane. I have a dual master cylinder on the car now. Who is recomended to buy the booster. Will I need a new rod from the brake peddle and anything esle need for this conversion. The factory non power brake system is really bad. Much to much...

I had a same type of problem with 3 cracks in the block. I used a product called Blue Devil. I found it on the shelf at Auto Zone. Follow the directions. The cracks seem to be sealed. I have 2 add on temp gauges and the bank with the cracks is running cooler. One of my cracks just started...

I AM STILL LOOKING FOR A CLUTCH FORK ANTI RATTLE SPRIG CLIP FOR A 49-53 FORD BELL HOUSING #8A-7562-B. THIS IS THE SPING WIRE CLIP KIND OF A "U" SHAPED CLIP WITH SOME CRAZY TWISTS AND TURNS. THE CLIP GOES ON TO A PRONG ON THE BELL HOUSING AND HOOKS TO THE CLUTCH FORK. MOSE'S CORDOBA SR...

1964 Galaxie Convertable BRAND NEW front vent glass ( tinted green) with ford bug. The glass is brand new with ford bug. I orded this in the wrong color. E-Mail me at lakewood46@cox.net with any questions

I have a 55 ford F100 with a corvett power rack located in front of the cross member. I am going to install a 74 302 engine. I have been told I need to go with a early ford Bronco oil pan with the rear sump. What years would work?

Looking for the anti rattle clip for the clutch fork #8A-7562-B This is the kind of horse shoe clip that holds the clutch fork to the bell housing on a 49-53 ford car. if you can help please e-mail me at lakewood46@cox.net Thanks Jack

The original rear wheel bearing inner race has about 1/4inch protrusion on either side of the bearing. The replacement numbered bearing from Bearing Distributers does not have the 1/4 inch schoulder on either side of the bearing. Can this bearing work a well without the 1/4 inch?