Recent content by Gino

Thanks Marshall, I’ll heed your advice. What do you mean by USA rods? Thanks again.

Thought I’d have some fun and remove the steering column a couple of times. I did not realize the Horn rod was so delicate. The rod had some bends and what not, I made it worse trying to improve the imperfections. Has anyone had any luck unscrewingup one of these. Thanks

I believe I understand and I’m thankful for the help. I can’t help wondering Of the possibility of a home made paper or other gasket material, thin I would think but able to fill imperfections. Just a thought and I might spend a bit of time thinking about it. You know the first electric chair...

Hi, do you mean the o gasket? Or is there a second gasket? Thanks

Hi, do you mean the cork o ring? And do you mean to say no gasket just grease? Sorry I’m confused.

Apparently a gasket is not needed between the housing and the steering sector shaft cover? This doesn’t seem right, please correct me and guide me to the info. Thanks

We are two toothed, the box and I. It has an excuse at 96 I’m only 70. I’ll try to post some pics. I wonder, say this is reassembled on the bench, would I be able test the amount of play? Thanks

Very sorry to hear this, I’m glad all are ok. I WOULD KEEP THE CAR! I would modify it into something it is not. Call it a conversation piece but I would have fun with making into say a Munster type drivable car. Then if possible buy a second Model A. But I would not be able to part with that...

Hi, there is too much play in the steering. I have the box disassembled and on the perfectly tidy work bench. I see some wear on the sector shaft, is a little wear acceptable? I believe the worm gear to be to be modern with 13 rollers. Any advice on this appreciated.

Sounds easy! Haha. Thanks for the help, looks like another job ahead. Closed cab pickup. God bless

Hi, when I turn the steering wheel the light switch moves with it just enough to blink the lights. Is there an easy fix? Thanks a lot

Yahoo!! Thanks very much, I was not wanting to redo. God bless.

Hi I don’t want my last thought to be, STUPID, Not including the pitman arm, would this be the sequence for assembling the parts of the Kit. Spring, plastic cap, ball ( I found it was not difficult to c- clamp it in place) Plastic cap, and then the large threaded cap. Thanks for the help.

Hi, at one time the post office were using A’s. I believe they were using a specific green. Would anyone know it’s name? Is there an on line colors charts? Any info in this area is appreciated. Thanks very much Gino

Hi, Is it possible for a mechanical fuel pump to continue pushing out pressure after the engine has been turned off? 68 mustang, 6 cylinder, 200 ci, single barrel. Can fuel pump pressure force fuel past a float in the carburetor? I’m unable to stop flooding. At this time I’m using a 1904...